BARREL:Win 101 20ga 30", 2.75 &3.00", forearm and iron Barrels for sale, gun classifieds or gun auction from Lowgun Steve. Buy or bid on this BARREL:Win 101 20ga 30", 2.75 &3.00", forearm and iron in the category Non-Guns

You may also be interested in:

Replica M3 Grease Gun Barrel Assemblies

High Standard Victor Barrel Rib

Benelli ER Shaw Custom Slug Barrel SBE II

Remington 1100 barrel modified

Ciener .22 Conversion For 1911A1

11" .223 complete upper

Description

Shipping and payments

Additional information

PLEASE NOTE THIS IS NOT AN ENTIRE GUN. BARREL, FOREARM AND IRON ONLY. NO FFL REQUIRED TO RECEIVE/SHIP I have a 30" vent-rib Winchester 101 O/U barrel with forearm and iron. This barrel fits the 20 gauge receiver. Jewelled sides at breech end, scroll engraved ears, fixed chokes:full/full marked.

It is difficult to get a good photo, but I have hi-res pix (very large filesize) if you would like to see them, message me. It's the only way to truly see the condition. There is a need for re-bluing, with some marks and evidence of surface rust on outside blued areas. Most pix are before re-oiling the barrel exterior. Iron is in similar condition.

The wood definately has signs of use.

It should be 100% functional. The bores are bright and I see no signs of rust there.

It probably needs to be fitted to a receiver by a gunsmith, it's in used but serviceable condition and I've set the starting bid low. Contact me through the message system with questions, for more images or to make a reasonable offer.

Verified bidders only please.

BARREL:Win 101 20ga 30", 2.75 &3.00", forearm and iron

Listed in category: Non-Guns > Barrels