Description:
Brand New in the Box, Ready to Ship. Buy It Now!!!
The Daniel Defense M4 Carbine, V7 uses our Modular Float Rail (MFR) 12.0, providing each shooter with the ultimate in modular adaptability. Should the shooter desire, the tube can be run “slick” with an uninterrupted top rail that runs the length of the tube. In addition, the 3” Modular Picatinny Rail sections allow the shooter to customize the rail set up. The DDM4v7 is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach the low profile gas block to the barrel assembly. Introduced in 2014, the V7 is one of 4 models that is finished with the new Mil Spec+ Cerakote. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
Caliber: 5.56mm NATO
Gas System: Mid-length
Product Weight: 6.54 lbs
Length: 32 ¼” – 35 7/8”
Magazine: Magpul PMAG 30-Round
Case: Daniel Defense Full-Latch Impact Plastic Case
Lower Receiver: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
Upper Receiver: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
Barrel: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7, 16? Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI tested
Gas System: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
Muzzle Device: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
Bolt Carrier Group: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
Buffer: H Buffer
Sights: Sold Separately
Handguard: Daniel Defense Modular Float Rail™ 12.0, CNC Machined of 6061-T6 Aluminum, with three Modular Picatinny Rail Sections, Type III Hard Coat Anodized
Receiver Extension: 6 Position Mil-Spec 7075-T6 Aluminum
Buttstock: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
Pistol Grip: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
Finish: Mil Spec+ Cerakote
100% Made in the USA!
Shipping to Lower 48 Only,
Shipping $30.00
KNOW YOUR LOCAL AND STATE LAWS!!
Condition:
New In Box
Brand:
Daniel Defense
Caliber:
.223 Remington (5.56 NATO)
Item #:
931203284
Stock No.:
02-128-12026047
Location:
PA
Trades Accepted:
Shipping Notes: Shipping to Lower 48 Only!
Please ask for Internet Sales when calling in.
All firearm sales are final. We do not accept returns for firearms whether they are new or used.
All firearms must be either shipped to a dealer in your state or picked up at our retail store in Saint Marys, PA. The buyer assumes the responsibility for transfer fees or background check fees that the receiving dealer will charge. It is also the buyer's responsibility to insure that the dealer will accept the firearm(s). We encourage that the buyer contact the dealer before we transfer the gun to them for pick-up to insure that there are no problems with your transfer. If the dealer refuses to accept delivery of your firearm, you will be responsible for shipping charges to recover the firearm and reship it to a dealer that is willing to receive it.
ORDERS WILL ONLY BE ACCEPTED FROM US RESIDENTS OF THE LOWER 48 STATES, ALASKA AND HAWAII. OUR FFL CLASS DOES NOT ALLOW FOR THE EXPORT OF FIREARMS, THEREFORE WE CANNOT SHIP OUT OF THE US.
**CALIFORNIA RESIDENTS: WARNING: SOME PRODUCTS MAY CONTAIN CHEMICALS THAT MAY EXPOSE YOU TO CHEMICALS WHICH ARE KNOWN IN THE STATE OF CALIFORNIA TO CAUSE CANCER AND REPRODUCTIVE HARM.
