Items Available For Purchase Today Object reference not set to an instance of an object. See All Federal XM193 LPC120 5.56 / Lancer L5 20rd Smoke For Sale from: executivetimemgnt | Positive feedback: 100% View | Verified Seller | 446 Completed Sales View Sellers Items Federal XM193 LPC120 5.56 / Lancer L5 20rd Smoke For Sale from: executivetimemgnt | Positive feedback: 100% View | Verified Seller | 446 Completed Sales View Sellers Items executivetimemgnt Seller Since: Jan. 2013 Identity Verified ( raleigh, NC ) This seller is NOT an FFL City: raleigh State: NC Current Price: ENDED Min. Bid: Time Left: (Ended) Shipping: Calculated on checkout Accepted Payment Methods: Returns: No Returns Description: 120 rounds of Federal Lake City XM193 comes packaged in a miniature plastic ammo can. XM193 product is first run, first quality product manufactured at Lake City Army Ammunition Plant for Federal ATK and is made to Federal specifications. All XM193 product is the same regardless of the sku or part number. (ie. XM193LPC is the same as XM193BK, XM193F and etc…) The only difference is the way they’re packaged. This XM193 configuration comes as 120 rounds packaged inside of a miniature ammo can. Ammunition Features and Specs Federal CALIBER: 5.56 mm, manufactured at the Lake City Army Ammunition Plant (LCAAP) CASE: Brass (Copper Alloy No. 260) BULLET: 55 gr. FMJ Boat-Tail PRIMER: M41 Operating Range: (-40 degrees to +125 degrees F) PRIMER SEALANT: Water resistant lacquer CASE MOUTH SEALANT: Yes CASE KNURL: No HEADSTAMP: Each loaded cartridge shall be headstamped with the manufacturers symbol and year of manufacture ACCURACY: 3-10round groups not to exceed 2.00 inch mean radius maximum average at 200 yards INSTRUMENTAL VELOCITY: 3165 +/- 40 FPS (78 feet from muzzle) using a 5.56 test barrel, 20 inches long ENERGY: 1223 Ft-Lbs. at 78’ CHAMBER PRESSURE: Piezotronic maximum average per 10 rounds - 55000 PSI in 5.56 test barrel (case mouth location) BULLET PULL: Minimum individual 35 lbs. PROPELLANT DETECTION: 100% mechanical/electronic detection of propellant levels within the cartridge VISUAL INSPECTION: 100% visual inspection of finished cartridges prior to packaging WARNING: For use in standard 5.56 mm chambers. Do not use in .223 chambers 3 Lancer L5 20 Rnd Translucent Magazine The L5-20’s design incorporates the same impact resistant translucent polymer body, hardened steel feed lips and rubber coated bottom found on the original L5. Included in the L5-20’s design is a number of user recommended changes; the magazine well stop has been replaced with a lower profile support rib. The new rib makes the L5-20 easier to get out of magazine pouches and allows the magazine to be utilized with the H&K 416 and SA80. The bottom of the magazine’s body has been reinforced to improve bottom retention. Features: * Made in the USA * Translucent polymer body that is impact resistant through a wide range of temperatures -Can be dropped onto the feed lips without damage -Withstands 5’ drop, fully loaded onto concrete at -40F and +180F -Withstands 5’ drop, fully loaded dropped with rifle * Body and component materials that are corrosion and chemical resistant * Stainless Steel Spring * Steel feed lips with a corrosion resistant coating, permanently molded into the body. * Round Count Markers at 20 Rounds * Body texture, contour and rubber coated bottom are designed to provide positive gripping and improve retrieval from magazine pouches. * Body design incorporates a constant radius geometry that facilitates follower/spring travel. * Easy to disassemble and maintain. The L5 20 Round Magazines have been tested and recommended by the members of the National Tactical Officers Association All auctions are cash discounted, add 3% for cc ****** BUY IT NOW receives FREE SHIP & NO CC FEES ******. Condition: New In Box Item #: 982314209 Location: NC Trades Accepted: Share: Shipping Notes: UPS ground/ add 3% for cc Items You've Viewed Recently Federal XM193 LPC120 5.56 / Lancer L5 20... $87.99 SELLER: executivetimemgnt Buy It Now
