Rohm .38 Special RG38 Gunsmith Special Repairs Needed Revolver Snub 2 inch Vent Rib Pinned Barrel 1967 Production C&R OK

For Sale from Robertson Trading Post |
Positive feedback: 99% View |
Verified Seller
| 22906 Completed Sales
Rohm .38 Special RG38 Gunsmith Special Repairs Needed Revolver Snub 2 inch Vent Rib Pinned Barrel 1967 Production C&R OK  Guns > Pistols > FIE Pistols
Description: Please note that this revolver has mechanical problems and needs repairs from a professional gunsmith. From a New England collection comes this RG38 Snub Revolver. Manufacturer was Rohm GmbH of Sontheim, West Germany. Importers until December 1, 1968 were various; this one probably came in through Eig Cutlery in Miami. After 1968, RG Industries opened in Miami, with German Barrels, cylinders, and part fitted into US Made Cast Frames. RG Industries was sued out of business in 1986 by none other than Sarah Brady. From this RG’s 26000 range serial number, it was manufactured in mid 1967. Type is true swing out, single and double action revolver with transfer bar internal safety and thumb latch cylinder release. Construction is steel inside barrel, cylinder, hammer, trigger, and internal parts fitted into a zinc alloy / zamak pot metal frame with pot metal barrel shroud, thumb latch, and hammer spur; and with brown plastic grip panels. Cylinder release / thumb latch is replacement fitted Smith & Wesson. Chambering is .38 Smith & Wesson Special Caliber, and cylinder capacity is 6 rounds. RG Revolvers were Not designed to withstand +P ammunition, but we know of a good many of this one’s production mates that survived firing +P. Barrel is two piece two inch, pinned into place, with steel inner barrel that has 8 groove right hand 1:18 rifling. Sights are two post vent rib with serrated ramp front, with frame integral fixed notch rear. Trigger is .220 smooth face, with .200 steel hammer with serrated spur. Ignition is floating firing pin, with transfer bar internal safety device that prevents the hammer from contacting the firing pin unless the trigger is fully depressed. Frame is square butt type, medium frame. Weight empty is 29 1/4 ounces, with center of gravity at the cylinder stop and trigger. Cylinder does not open correctly; as it sits, a pair of pliers to the ejector rod will make it open. The thumb latch cylinder release is not operable. Apart from that, cylinder rotation, and trigger and hammer operation are normal. Finish is anodized alloy and blue steel. Surface detractions on this RG38 are moderate to extensive, principally dullness to the anodized area, and edge whitening and occasional freckling to the blue. We rate its finish as Good, perhaps Very Good, 70 to 75 percent vicinity by our estimate. Photos, at any rate, ought to suffice for our distinguished shoppers to judge finish grade for themselves. Double action trigger pull is tight but smooth 12 pound vicinity. On both single and double action, the cylinder times correctly on all six positions. Cylinder has no lateral play with the trigger fully depressed. Blast effect to the under side of the frame top strap directly above the barrel’s forcing cone is minimal, only a faint etchy impress. We estimate it was fired fewer than 200 times, all with standard velocity ammunition. Trigger rebound is good. Replacement pricing on similar revolvers from Armscor and Rossi is $300 or more. We’re offering the 1967 RG38 in the photos, however, for only $ 89.00. Transferable to California civilians due to its age and C&R Status. Not transferable to civilian residents of Illinois, District of Colombia, Hawaii, Maryland, Massachusetts, Minnesota, or any jurisdiction with a Melt Law or Approved Firearms Roster. Any ammunition or personnel in our photos are Not included.



$15handguns lower 48; $40 toAlaska, Hawaii or Puerto Rico, USPS Priority Mail, insured with Delivery Confirmation. Don’t let your buddies use your account, that kind of thing smells like felony level straw purchase attempt. Please Note that C&R Handguns, as concealable weapons, must transfer through an 01 or 02 FFL inBoston, California, Chicago, CT, D.C., DE, HI, IL, NJ, and NY. C&R or Standard FFL ok by fax, e-mail or mail. We offer 7 day money back on used guns and items, but No Returns on Lay-aways or ammo. We do not pay transfer fees or return shipping.


Condition: Used - See Item Description
Brand: EAA CORP
Caliber: .38 Special
Location: TN

Trades Accepted: Yes.

Don't let your buddies use your account. Registered user must be the buyer, with his or her own money. Buying firearms and related items for other people can result in felony charges. Don't try, either, to circumvent any law; for example, a California civilian may not buy a high capacity magazine and have it shipped to his brother-in-law in Nevada. That is a felony.
GA Pay buyers are NOT charged until we confirm we have the item and are ready to ship it. The same thing is true for phone-in, fax-in, and mail-in payments. In this respect, and in several others, Guns America outshines all its competitors. This is the best firearms website there is, hands down.

Shipping Notes: See Description

Item #: 902409903
SKU: RG38S
Stock No.: HG7357
Seller Since: Jul. 2007
Seller Level: Trusted Seller
This seller is an FFL
City: Henderson
State: TN
Phone: 731-989-7641
Price:
$89.00

This Seller Accepts Online Payment

Shipping: $15.00
Accepted Payment Methods: Visa MasterCard Discover Check Money Order
Returns: 7 Days

Send Message to Robertson Trading Post

You must login or register to send a message to this seller.
Contact Seller as Guest

Your Recently Viewed Items

MC ok || Li Mc HIT || || LP Mc HIT ||
© 1997-2019 GunsAmerica.com LLC All rights Reserved.
#HUNT365