This listing is for ONEAction Bar Assembly. From an Importer liquidation come this complete action bar assembly for an Akkar made Charles Daly model 300 or 301 Pump Action shotgun chambered in 12 gauge, that will accept 3 inch shells. Manufacturer was Akkar Silah Sanayi Ltd. of Istanbul, Republic of Turkey, the manufacturer of all the shotguns themselves. Importer was Samco Global Arms, Inc. / SGAI of Miami, the Charles Daly Importer from 2012 until 2015. Samco was successor to Kassnar importer, and preceded the present Charles Daly importer in Ohio. Production dates ranged from 2010 until 2014. Construction is entirely steel, a welded assembly comprised of 4 pieces total. Finish is matte blue oxide. This assembly will fit both older model and late model 300 or 301 Kassnar, Akkar and Daly shotguns that will accept 12 gauge, 3 inch shells but not 3 1/2 inch. Dimensions are 9 1/4 inches overall length; 1.144 outside width; .2795 rail thickness; and.4655 upper block width. Parts included are View 46 Action Bar; 47 Action Bar Plunger Spring; 48 Action Bar Plunger; and 49 Action Bar Plunger Plunger Retaining Pin. These Action Bar Assemblies will only fit a Kassnar 300, or an Akkar model 300, or an Akkar / Charles Daly model 300 or 301 Pump Action shotgun chambered in 12 gauge, that will chamber 3 inch shells; and whose forend and action uses one piece action bar assembly. They will not fit a 20 gauge Daly, will not fit a 3 1/2 inch chambered Akkar, will Not Fit any Daly Akkar Semi Auto; and will not fit the dump lever of a 1947 John Deere Manure Spreader. Surface detractions are minimal, only occasional shelf wear from Samco's warehouse. Replacement pricing on these from our colleagues in New York is upwards of $60. We're offering our Akkar / Daly assemblies, however, for half that price, each one for only $24.00.