Description:
THE FULLY US-MANUFACTURED Ruger AR-15 AR556
Ruger® Rapid Deploy folding rear sight provides wind age adjust ability, and pairs with the elevation adjustable front sight for a solid, reliable aiming system. The rear sight can be folded out of the way to make room for optics, but can be instantly redeployed if needed.
Six-position telescoping M4-style buttstock and Mil-Spec buffer tube allow the rifle to be properly sized for different shooters, or varying levels of outerwear or defensive gear. (Model 8502 features a fixed stock.)
Made from aerospace-grade 7075-T6 aluminum forging, the flattop upper receiver includes a forward assist, dust cover and brass deflector, and is Type III hard coat anodized for maximum durability.
Bolt is machined from 9310 alloy steel and is shot peened and pressure (proof) tested to ensure strength, structural integrity and durability.
Front sight post is elevation adjustable, and a front sight tool is included. The A2-style F-height allows co-witness with many optics.
Patent pending Barrel Nut and Delta Ring are designed for one person handguard removal and installation. The design accepts standard carbine length handguards. The barrel nut uses a standard wrench and can be swapped with a Mil-Spec barrel nut if desired.
Milled gas block is located at a carbine-length (M4) position for improved balance and handling. Multiple attachment points include a QD socket and bayonet lug (model 8500 only), for many sling and accessory mounting options. Serrations on the angled face of the gas block provide a low-glare surface.
Cold hammer-forged barrel with ultra-precise rifling provides exceptional accuracy, longevity and easy cleaning. The 1:8" twist rate stabilizes bullets from 35 to 77 grains, and the 5.56 NATO chamber allows the use of both 5.56 NATO and .223 Rem. Ammunition. M4 feed ramps provide improved operational reliability, and the matte black oxide finish reduces glare and provides corrosion resistance. A Ruger® flash suppressor is provided, and the 1/2"-28 threaded barrel allows for standard muzzle accessories to be installed. (Model 8500 only.)
Ergonomic pistol grip features an extended trigger reach for more precise trigger control.
Technical Specifications Of Ruger AR556
Stock: Black Synthetic, Collapsible
Front Sight: Adjustable Post/li>
Rear Sight: Adjustable Ruger® Rapid Deploy/li>
Barrel Length: 16.10"/li>
Thread Pattern: 1/2"-28/li>
Twist: 1:8" RH/li>
Capacity: 30/li>
Finish: Type III Hard Coat Anodized/li>
Height: 8"/li>
Weight: 6.5 lb./li>
Overall Length: 32.25" - 35.50"/li>
Finish: Type III Hard Coat Anodized/li>
Length of Pull: 10.25" - 13.50"/li>
Grooves: 6/li>
Package Includes
Ruger AR556 5.56NATO Rifle
Plano, weather-proof, hard, locking gun case 42", VERY NICE!!
150 lumen weapon light with finger switch
Carbine-Length Quadrail
Block & Ladder-style rail covers
Vector Optics, variable-brightness, red & green dot scope with flip lens covers.
Collapsible 6-position stock
5nm dedicated, Green Laser, with foregrip switch
Dedicated aluminum bipod
Ambidextrous, single-point sling mount
Single-point/double-point, nylon sling
4x30 magnified Vector Optics Goliath Scope w/ Illuminated Reticle (Red, Green, Blue)
5x30-round magazine (4 of which are Magpul Gen 2 or 3)
Additional Magpul Magazines available for purchase for $15 each
Sturdy foregrip and foregrip-mounted pressure switch for laser control
Condition:
New In Box
Brand:
RUGER & COMPANY INC
Caliber:
.223 Remington (5.56 NATO)
Location:
UT
Trades Accepted: No
Shipping Notes: See Description
TacOpShop is a Utah-based FFL Dealer specializing in Fully Loaded Tactical Rifles.
The TacOpShop specializes in those tricked-out rifles you see at the gunshows, high-end gun dealers, and on internet sites, like this one, but can't afford because they're asking $3,000 for 'em. Most fellas want one if it wouldn't make a bigger dent on their budget than .50 BMG on steel silhouettes.
Eighty plus percent of Americans have a middle-class income. We build rifles and shotguns to match. We don't think you should have to pay $500 or $1000 more to get a different shape of groove cut into your perfectly functional quad-rail. We also don't try to oversell you on a $1000 optic that you need