Description:
Brand New in the Box, Ready to Ship. Buy It Now!!
The evolution of the SPR comes home to Daniel Defense in the MK12. Born of necessity, raised in the Army’s Marksmanship Unit and refined to Daniel Defense Mil-Spec+ standards, it is now available.
The MK12 is constructed around an 18-inch Stainless Steel barrel with a chamber created during the Cold Hammer Forging process, which ensures the most precise alignment of the chamber to the bore possible. These barrels, some of the most accurate and durable barrels available, are bead blasted and chemically passivated to resist corrosion. The MK12 barrel is engineered with a rifle-length direct impingement gas system and utilizes the MK12 gas block, which is built to Crane Specifications for USSOCOM. The MK12 gas block is precision CNC machined from 416 stainless steel and Black Oxide Coated. The rifle is fed with a M16 profile bolt carrier group and uses a Vltor Mod 4 charging handle for ease of operation. The upper receiver is equipped with a free floating DDM4 Rail 12.0™ allowing for your choice of optics and accessories and is finished off with a Daniel Defense Improved Flash Suppressor.
The MK12 was designed from the ground up to be a precision rifle, therefore it required certain refinements. We equipped it with the Geissele SSA® 2-Stage Trigger to give the marksman an advantage delivering precise fire to the target. This precision rifle comes finished with Daniel Defense Tornado™ Cerakote™ and is furnished with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol grip.
Caliber: 5.56mm NATO
Gas System: Rifle
Weight: 7.41 lbs
Length: 34 ¾” – 37 7/8”
Magazine: Magpul PMAG 20-Round
Lower Receiver: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
Upper Receiver: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
Barrel: Proprietary Blend of Stainless Steel, Cold Hammer Forged, 1:7” twist, 18? MK12 Profile, Bead Blasted, and Chemically Passivated
Gas System: MK12 Low Profile Gas Block CNC Machined of hardened 416 stainless steel with Black Oxide Coating, Rifle-Length, Direct Impingement
Muzzle Device: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
Bolt Carrier Group: M16 Profile, Chrome Lined, Properly Staked Gas Key
Buffer: H Buffer
Sights: Sold Separately
Handguard: Daniel Defense DDM4 Rail 12.0, CNC Machined of 6061-T6 Aluminum
Receiver Extension: 6 Position Mil-Spec 7075-T6 Aluminum
Buttstock: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
Pistol Grip: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
Rail Panels: 3 Panels made from Santoprene, heat resistant to 300° F.
Finish: Daniel Defense Tornado Cerakote
Case: Daniel Defense Full-Latch Impact Plastic Case
Shipping to Lower 48 Only,
Shipping $30.00,
KNOW YOUR LOCAL AND STATE LAWS!!
The prices on this item reflect a 2.5% cash, money order, or certified check discount. This discount is not valid for credit card purchases. Add 2.5% to the total cost for credit card purchases.
Condition:
New In Box
Caliber:
5.56x45 mm NATO
Item #:
920047863
Stock No.:
02-142-01198047
Location:
PA
Trades Accepted:
Shipping Notes: Shipping to Lower 48 Only!!
Please ask for Internet Sales when calling in.
All firearm sales are final. We do not accept returns for firearms whether they are new or used.
All firearms must be either shipped to a dealer in your state or picked up at our retail store in Saint Marys, PA. The buyer assumes the responsibility for transfer fees or background check fees that the receiving dealer will charge. It is also the buyer's responsibility to insure that the dealer will accept the firearm(s). We encourage that the buyer contact the dealer before we transfer the gun to them for pick-up to insure that there are no problems with your transfer. If the dealer refuses to accept delivery of your firearm, you will be responsible for shipping charges to recover the firearm and reship it to a dealer that is willing to receive it.
ORDERS WILL ONLY BE ACCEPTED FROM US RESIDENTS OF THE LOWER 48 STATES, ALASKA AND HAWAII. OUR FFL CLASS DOES NOT ALLOW FOR THE EXPORT OF FIREARMS, THEREFORE WE CANNOT SHIP OUT OF THE US.
**CALIFORNIA RESIDENTS: WARNING: SOME PRODUCTS MAY CONTAIN CHEMICALS THAT MAY EXPOSE YOU TO CHEMICALS WHICH ARE KNOWN IN THE STATE OF CALIFORNIA TO CAUSE CANCER AND REPRODUCTIVE HARM.
