Description:
Here is a nice mixed parts shooter M1 Garand. Receiver is Springfield Armory, six digit serial number 705635, made early in WW2, in July 1942. Barrel is Springfield dated February 1956 with a good bore. No import marks.
This rifle is in very good used condition. Marked parts are Springfield, although some are postwar. All parts are described below and shown in photos. Stock is new walnut.
This M1 has been disassembled, cleaned, lubricated, and test fired. Parts were clean for photos, coated with oil and greased where appropriate when reassembled.
Two M1 enbloc clips (no ammo) and a repro canvas sling are included.
SA M1 sn 705635 Specs:
Receiver: marked “D 28291-17” on leg, heat lot C11O. VG condition, not original finish. Minor pitting on the horizontal surface that contacts wood, none on the legs, see photos. This is under the parkerizing, and will not get worse.
Barrel: marked “F6535448 2 56 A226A” in op rod slot, with two “P” marks, “T”, “M”, and small stars and eagle stamp. Bore is bright, exc crown and rifling.
Barrel Gauge Measurements: Muzzle Wear (MW): 1, Throat Erosion (TE): 4
Clip latch: late square front type.
Op rod: curved side, marked “D35382 6 SA”, modified. Excellent condition, no pitting, some finish wear. Op rod and bolt cycle freely by tilting when everything is assembled except main spring and hammer (Garands with binding or rubbing op rods tend to have feeding and/or ejecting problems).
Op rod catch: late type, unmarked
Bullet guide: milled WWII type
Follower: late type, marked “11”
Follower arm: single bevel WWII type, hammer forge mark “2”
Follower rod: long fork, riveted
Bolt: marked “D28287-12SA S-A1<>”
Sight knobs: elevation “WCE”, windage “DRC”
Rear sight cover: late type with ribs
Rear sight aperture: double track
Trigger housing: marked “D28290-1 SA”. Good condition, minor pitting where floorplate edges contact wood.
Trigger guard: stamped with milled hook
Trigger: late type, no extra hole
Hammer: marked “C46008-3 SA”
Hammer spring plunger: late type without wings
Safety: round top, marked “SA_11”
Gas cylinder: narrow sight platform, flat on top of rear ring. Gas cylinder group has been refinished. The gas cylinder/barrel fit has been tightened to maximize accuracy.
Front sight: 0.67 wide, unmarked
Gas cylinder lock: beveled front type, unmarked
Gas cylinder screw: cross slot, poppet valve type, marked “O”
Stock and handguards: walnut, new, nice finish
Sling: new repro
TERMS:
-Ships Free to FFL. C & R FFL is ok.
-Price reflects cash discount for checks and money orders. Credit cards are accepted with a 3% fee.
-Payment and FFL information must be received within 5 days or item will be relisted.
-Sales tax charged to Florida residents only.
-No trades, layaways or local pickup.
Returns:
-Used guns: 3 day inspection policy.Item may be returned if in same condition as when it left our facility. Returns are subject to a $35.00 restocking fee. Buyer is responsible for return shipping charges (must include insurance and signature requirement) and any transfer fees.
-New guns: no returns, new guns are covered under manufacturer's warranty.
Condition:
Used - See Item Description
Brand:
SPRINGFIELD ARMORY
Model:
M1 Garand
Caliber:
.30-06 (all)
Location:
FL
Trades Accepted: No
Shipping Notes: Ships Free to FFL in lower 48 states. Please contact us for quotes to Alaska and Hawaii. C & R FFL is ok.
