Daniel Defense M4A1 (Mil Spec+) Cerakote, featuring the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.
NEVER FIRED AND MINIMALLY HANDLED and is as NEW as it gets without being store purchased.
PROPERLY STORED AND MAINTAINED, CLEAN AND LIGHTLY OILED.
SOLD WITH XTRA UPGRADED COMPONENTS AS SEEN IN THE IMAGES AND IN THE DETAILS LISTED BELOW .
ALL THE ORIGINAL FACTORY COMPONENTS WILL BE INCLUDED WITH THE PURCHASE.
The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005. The M4A1 features a 14.5” Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor. Introduced in 2014, the M4A1 is one of 4 models that is finished with the new Mil Spec+ Cerakote. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
•LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
•UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
•BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 14.5? M4 Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
•GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
•MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
•BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
•BUFFER: H Buffer
•SIGHTS: Sold Separately
•HANDGUARD: Daniel Defense M4A1 Rail Interface System (RIS) II, CNC Machined of 6061-T6 Aluminum
•RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
•BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
•PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
•RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
•FINISH: Daniel Defense Mil Spec+ Cerakote
•Made in the USA!
Manufacturing # / SKU: 02-088-15126-011
Restricted Shipping: Yes
Caliber: 5.56mm NATO
Gas System: Carbine
Product Weight: 6.74 lbs.
Length: 31 ½” – 34 ¾”
Magazine: Magpul PMAG 30-Round
Case: Daniel Defense Full-Latch Impact Plastic Case
Manufacturer: Daniel Defense
XTRA UPGRADED COMPONENT DETAILS:
GEISSELE SSA-E 2-STAGE Trigger.
A.I.M. Nickel Boron BGC Bolt Carrier Group.
VORTEX VIPER PST 1-4X24 W/TMCQ MOA PST-14ST. Quick flip lens covers included.
COLT Scope Mount included.
(1) set, front and rear quick flip 45 degree backup iron sights,
(1) MAKO Foregrip BLACK,
(1) Additional 30 round Magpul magazine,
ALSO INCLUDES THE FACTORY DANIEL DEFENSE HARDCASE (BLACK), ORIGINAL OWNERS MANUALS, AND ACCESSORIES.
Warranty Policy/Warranty Claims
Daniel Defense offers a 100% lifetime guarantee on all manufacturer defects. Guarantees are transferable. If any item we manufacture is faulty, defective, or broken due to manufacturing, we will repair/replace at no additional cost to you. See danieldefense.com/faq#WARRANTY
$1999.00 OR MAKE OFFER.
$35.00 Shipping and Handling. By FFL transfer only.