The Model 70 Extreme Weather Stainless utilizes a Bell and Carlson™ lay-up composite stock that provides a solid feel and features trim and lightweight ergonomics. It has a textured charcoal gray matte finish for rugged good looks and improved grip in adverse conditions.
The sculpted cheekpiece helps insure proper eye-to-scope alignment from any shooting position. The thick, black Pachmayr® Decelerator® pad helps take the felt recoil bite out of high performance magnum cartridges.
Like all Model 70s today, it features the Pre'-64 type claw extractor with Controlled Round Feeding so the cartridge may be easily withdrawn from the chamber at any point after it leaves the magazine. It also means that the cartridge base is grabbed by the claw as it leaves the magazine so it enters the chamber straight, in line. And don't forget that the cartridge feed lips are machined as part of the receiver for improved reliability in feeding. The classic Three-Position Safety offers both on safe and fire positions, plus a middle position that locks the firing pin yet still allows the bolt to be operated, providing a greater margin of safety when checking the chamber condition or unloading.
The Extreme Weather SS rifle's free-floating, fluted stainless steel barrel is made in the same factory as those found on U.S. military rifles and machine guns, and features a recessed Target Crown to protect the rifling. The fluted barrel allows us to give you a stiffer barrel profile that does not carry excessive weight. Two stainless steel sling swivel studs are installed as expected.
Bell & Carlson makes a uniquely high quality product -- that is the reason Winchester Repeating Arms has teamed with them over the years to produce our finest specialty rifles. With features like a proprietary molding system that maximizes strength and one of the industry's most acclaimed aluminum betting block designs (for a total lock from action to stock), you get superb accuracy, ideal balance and strength only possible with non-traditional stock engineering.
The Extreme Weather does not have a traditional injected type stock. As per specifications developed by Bell and Carlson and Winchester Repeating Arms, the stocks are "constructed using a 'hand lay-up' process, using a variety of composite materials. These composites -- including fiberglass, aramid fibers, graphite, epoxy gel coats and laminating resins; and polyurethane reinforcement with milled fiberglass -- provide a warm and solid feel rather than the hollow feel one gets from injection molded stocks." The Extreme Weather stock is reliable over a temperature range of -50 degrees to +140 degrees Fahrenheit for extreme stability under any heat and cold conditions you might encounter around the world: Alaska to Arizona and beyond.
Caliber / Gauge: 270 Win.
Action Type: Long Action
Magazine Capacity: 5
Barrel Length: 22"
Nominal Overall Length: 42 3/4"
Nominal Length of Pull: 13 3/4"
Nominal Drop at Comb: 1/2"
Nominal Drop at Heel: 1/2"
Nominal Weight: 7 lbs. 2 oz.
Rate of Twist: 1 turn in 10"
Metal Finish: Stainless
Stock / Grip: Composite
We only offer trades in store.
Bob Wards is a 4th generation family owned sporting goods store in Montana started 1917. over 4000 guns in stock.
Returns are accepted on defective items if notified within 3 days of receiving item.