Luger P08 Upper Receiver & Bull Barrel Assembly, 9mm
This is a complete original upper receiver & 8" bull barrel assembly for the Luger 9mm pistol. The barrel has a .845” diameter with a Patridge style front sight that is 1/8” wide with a height of .342”. The barrel is marked “H. Durham” on the bottom. The bore is clean and in very good condition. The receiver includes the breech block assembly with firing pin and extractor, the front and rear toggle link assemblies, the trigger bar assembly and the ejector. The rear toggle link is stamped with a “31”. The left side of the receiver and the breech block have the “Crown N” German nitro commercial proof mark. The right side of the receiver is marked for export with the “Made in Germany” stamp. The forward toggle link has been altered to accept an adjustable rear sight assembly.
This is a used assembly in very good overall working condition. The exterior shows moderate wear with minor bluing wear with some scratches.