24 inch Stainless Bull barrel and A3 (Flat Top). This (5.56mm / .223) caliber barrel is 24 inches long, and features an 11 degree target crown for muzzle protection. It sports a full length, aluminum alloy handguard. This hand guard is knurled for a positive grip, hardcoat anodized for long life and scratch resistance, and completely free floats the barrel, enhancing accuracy and dissipating heat. It is a two piece design for ease of cleaning. The gas block is machined from aircraft aluminum and hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal. This gas block has 4 M1913 Picatinny rails for fast and easy attachment of accessories. The barrel is machined from 416 R, re-sulpherized, gun quality stainless steel, and hardened to a Rockwell C of 28 to 32 for extremely long life, heat dissipation, and complete corrosion resistance. The 24 inch barrel gives a higher velocity, smaller standard deviation in velocity between shots, and greater accuracy than shorter barrels. All external steel parts are manganese phosphate finished for long lasting good looks and corrosion protection. The barrel is a BULL contour ( .950 diameter under the handguard and .935 diameter under the front sight base) for optimum accuracy The barrel is button rifled with 6 grooves, right hand, 1 / 9 twist. The barrel is mounted on a FORGED A3 upper receiver with built in Mil-spec M1913 Picatinny accessory rail, with the correct rail numbers engraved, made from certified forgings, hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. The upper features a forward assist and hinged ejection port cover. The buttstock is the current US Mil-Spec A2 buttstock. This buttstock features the correct length for American shooters, aluminum spacer, trap door butt plate and correct foam insert. DPMS lower on a Blackthorne (Vulcan Arms) Upper.
Purchasing a firearm from Lakeside Products LLC. is easy. You must first contact a FFL dealer (Fedaral Firearms License) in your area. We cannot ship firearms to anyone who does not furnish us with an FFL. Your dealer will charge you a minimal transfer fee negotiated for the Firearm Transfer. This fee is negotiated between the dealer and yourself.
Note: We cannot ship to California or any other location that does not respect your 2nd amendment rights.
The FFL can be sent via e-
Master/Visa accepted with a 3% surcharge (these prices are discounted for a cash purchase).
Cashiers checks and personel are accepted.
Personal checks will be accepted, but held until clearing your bank.
We do not accept Pay Pal
If you are a resident of Oklahoma there will be sales tax required. This is for in-state shipment.
Lakeside Products LLC
Manufacturer Of Fine Weapons and Amunition