Russian Saiga-12 by EAA ### 12 Gauge ### 24" Barrel ### Made in Russia by IZHMASH ### CUSTOM, NEW, & RARE ###

For Sale from Nrsimha42 |
No feedback Yet View |
Verified Seller
Russian Saiga-12 by EAA ### 12 Gauge ### 24" Barrel ### Made in Russia by IZHMASH ### CUSTOM, NEW, & RARE ###  Guns > Shotguns > Saiga Shotguns > Shotguns
Description: The listing is for 1 (one) BRAND-SPANKING-NEW Extremely Rare Custom Saiga-12 Shotgun with 24-inch Barrel; Imported by EAA Corp.; Made in Russia by by IZHMASH.

This is an early version of Saiga-12 imported by European American Armory Corp. (EAA Corp.) back in 2001. Manufactured by the plant that Mikhail Kalashnikov dedicated his life to, one that makes AK's for the Russian Armed Forces. Banned from importation. Extremely rare, as very few of them were imported. Unfortunately, these days, there are very few of these around, especially in brand-new / never fired condition, & still fewer - customized by a team of gunsmiths, who know what they are doing.



Modifications:

1. Initially, it was planned to have the barrel threaded to accommodate the "Saiga-12 V6 Muzzle Brake" by Bad Boy Gunz (Steel Version) (80% Recoil Reduction) that you can see on Picture 1 & others, however, according to my gunsmiths, this unit, being the OLD version, unlike newer ones, turned out to have much stronger barrel that, due to the way it was designed, was INCAPABLE of being threaded. Unfortunately, I cannot remember all the technical details that my gunsmiths shared with me that day to explain why it was that way. Finally, they ended up modifying the muzzle brake with their machinery & then - brazed it to the tip of the barrel permanently.

2. The factory Trigger Group, the Trigger Guard, & the Trigger Plate were removed from the receiver;

3. The holes left after the linkage rivets were removed, as well as the old pistol grip nut opening, were welded up & blended with the rest of the receiver;

4. An MD Arms "Saiga-12 Izhmash Style Trigger Guard" was riveted to the bottom of the receiver permanently;

5. A rectangular-shaped opening was cut in the receiver to accommodate an AK pistol grip;

6. The unit was degreased, sand-blasted, & coated with Moly Resin™ ();

7. A TAPCO "AK G2 Trigger Group" was modified as required & installed in the receiver, using a Carolina Shooters Supply "Trigger Pin Retainer";

8. The factory Handguard was replaced with a "CHAOS Saiga-12 Titan Rail" handguard that was fitted accordingly;

9. The factory Front Recoil Spring was replaced with a Carolina Shooters Supply "Performance Recoil Spring," in order to improve reliability with low brass shells;

10. The factory stock was replaced with a "Magpul Zhukov-S AK-47/-74 Folding Polymer Stock" (Magpul P/N: MAG585-BLK) - with 2 (two) Sling Mount Kits (Type 1 & Type 2) installed separately;

11. A US-manufactured "MAGPUL MOE® AK+ Pistol Grip (AK47/AK74) (P/N: MAG537)" was installed on the receiver;

12. The factory Gas Regulator was replaced with a TAC 47 Industries "Saiga-12 Auto Plug 2.0" one, in order to improve reliability with various types of ammo.

13. The Bolt Carrier, Bolt, Recoil Spring Rod & Shield were coated with NP3 finish.



When this was all complete, it was discovered that the Fire Selector Stop that was part of the MD Arms "Saiga-12 Izhmash Style Trigger Guard" did NOT stick out far enough to stop the Fire Selector lever, which is why it was decided to add an additional fire selector stop to the receiver. I was warned that this would cause some sort of damage to the unit's finish, but there was no other choice. Unfortunately, as warned, a small scratch was left next to the Trigger Pin, as shown on Picture 3 above. My gunsmiths used a touch-up pen, but its color was slightly different. If you want the scratch gone, I would recommend purchasing a small quantity of Flat Black Moly Resin™ paint & equalizing the area around it.



What is included with the shotgun:

1. One (1) 8-round magazine manufactured by IZHMASH;

2. One (1) set of CHAOS Saiga-12 H&K Style Sights;

3. One (1) G.P.S. Grip Pod Hand Grip/Bipod System;

4. One (1) factory Gas Regulator;

5. One (1) factory Oil Bottle;

6. One (1) factory Cleaning Kit;

7. One (1) factory Front Recoil Spring;

8. One (1) Instruction Manual.


Condition: Never fired
Brand: IZHMASH
Caliber: 12 Gauge
Location: WA

Trades Accepted: No

Shipping Notes: See Description

Item #: 984305354
Seller Since: Aug. 2020
Identity Verified ( Bellevue, WA )
This seller is NOT an FFL
City: Bellevue
State: WA
Price:
$2,549.95


Shipping:
Accepted Payment Methods: Money Order
Returns: No Returns

Send Message to Nrsimha42

You must login or register to send a message to this seller.
Contact Seller as Guest

Your Recently Viewed Items

MC Set || Li Mc miss || || LP Mc miss ||
© 1997-2020 GunsAmerica.com LLC All rights Reserved.
#HUNT365