Description:
*Information from manufacturer's website:
Brand new 16" Pre-Ban M4 CARBINE Profile Rifle Kit
CARBINE Gas System
Rifle kit comes with complete upper assembly head spaced and test fired, buttstock with components, and complete lower parts kit. Rifle Kit does NOT come with lower receiver or magazines.
Other selections are available for upper, bolt and carrier, charging handle, handguards, flash hiders, and gas blocks. Barrel customizations are also available. Please choose from the options listed.
NOTE: F-Marked Front Sight Base is not compatible with an A2 Upper due to height compatibility, therefore if you choose an A2 Upper and want a standard front sight base you need to choose the Standard A2 Front Sight Base.
Rifle Kits require a signature upon delivery.
PLEASE CHECK WITH YOUR LOCAL FFL DEALER TO MAKE SURE THE WEAPON YOU ARE PURCHASING IS LEGAL FOR YOUR STATE.
****DUE TO COMPANY POLICY AND RECENT LEGISLATION, RIFLE KITS WILL NOT BE AVAILABLE FOR SHIPPING TO RESIDENTS OF NEW YORK OR CUSTOMERS USING A BILLING ADDRESS IN THE STATE OF NEW YORK.
Warning! Always have a competent gunsmith assemble your rifle kit and headspace your barrel before first use. Using a rifle put together incorrectly or assembled using incorrect or modified parts can result in a damaged rifle, personal injury, death, or damage to property.
Barrel: Chrome Moly Vanadium, M4 Feed Ramps, 16" Length, 1x9 Twist
A2 Flash Hider, Manganese Phosphated, Phosphated under Front Sight Base, Taper Pins in F-marked Front Sight Base, Threaded Muzzle, M4 Profile Barrel
Chamber: 5.56 X 45 mm
Bolt And Carrier: Phosphated 8620 Steel Carrier Assembly, Carpenter 158 Bolt HPT/MPI Tested, Heat Treated and Plated, Mil-Spec Chrome Lined Carrier Interior, Carrier Key - Chrome Lined, attached with Grade 8 Screws
Properly Staked & Sealed Gas Key
Handguards: Carbine Length, Aluminum Delta Ring, Single Heat Shield
Upper Receiver: Forged 7075 T6 Aluminum, A3 Flat Top with M4 Feed Ramps, Hard Coat Anodized, Mil-Spec Ejection Port Cover and Round Forward Assist, Right Hand Ejection, Bore's surface is coated with dry film lube, over the anodized surface
Buttstock: M4 5 Position with H-buffer and spring, Reinforced Fiber, Mil-Spec Sized Tube
***Buyer must provide photo identification & address verification upon purchase via email - instructions will be provided once purchase is confirmed
Condition:
New In Box
Brand:
Del-Ton
Model:
16" M4 Carbine Rifle Kit RKT100
Item #:
991175994
Stock No.:
43521
Location:
FL
Trades Accepted: Yes.
Shipping Notes: Alaska and Hawaii are required to pay actual shipping costs for anything over the standard shipping fee on the ad. Delivery signature will be required for this purchase. *Buyer must provide photo identification & address verification upon purchase via email - instructions will be provided once purchase is confirmed