Just delivered to our shop this week were a few of the up till now impossible to find model 132 Saiga Rifles. Since we are still in the build process for some of them you can decide the color you would like. As long as the coatings have not been applied you have several options. Otherwise they will be refinished in black Cerakote.
The gun being offered in this ad has the 6 position ATI StrikeForce Elite folding and collapsable stocks. These stocks are a hybrid design since the newest model of StrikeForce Elite is all metal but does not fold. However we purchased the metal buffer tubes and upgrade the previous folder model to an all aluminum heavy duty stock. These are by far the best looking stocks we have used in a long time.
These rifles are built using the same quality and knowledge seen in our Saiga 12 models. Each rifle is stripped to a shell. All parts are media blazed to remove all traces of the cheap spray paint applied by the Russian's. The old trigger groups are removed and replaced with a modified Tapco G2 which will have a 2-3 pound pull.
The old trigger group holes are big welded and ground smooth for a professional look. None of that 4 screws or rivets on your receiver like I see so many other guns being sold have. Our receivers look like an authentic Russian AK-47 is supposed to look. See photos for example of what we do compared to other guns sold here.
The old trigger guard is removed and thrown away. It is replaced with a Ram Superior Trigger Guard. We also add the bullet guide to allow the use of any and all surplus AK magazines on the planet. These rifles internally will be the same as any other AK-47 on the market with the exception that everything is factory new. There are no surplus parts.
We take the time to remove a portion of the barrel shroud and thread the barrel in the standard 1/14 LH Russian threads and add a flash suppressor.
We also modified the mag release to accept ANY standard AK magazine INCLUDING DRUMS. Bullet Guide installed to assure feeding of ANY AND ALL ammo.
These rifles like all our firearms are refinished in Cerakote Firearms Coating. Cerakote it the best and most durable finish on the market. It is 100% solvent proof and rock hard. Another advantage is it has built in lubrication in the form of teflon in the coating matrix. This makes for an extremely smooth operating rifle.
Other upgrades include an aluminium quad rail, forend pistol grip, ergonomic pistol grip, 30 round magazine, 10 round factory magazine, and all removed factory stocks. Plus all the parts listed below.
The Red/Green Dot optics shown in the photo is an OPTIONAL ADD ON for $55. Everything else listed is included.
• Saiga Model 132 16" Threaded Barrel
• 30 Round Magazine
• 10 Round Magazine
• Bullet Guide
• Ram Superior Trigger Guard
•Bird Cage Flash Suppressor
• Cleaning Kit
• ATI StrikeForce 6 Position Collapsible/Side Folding Stock
• Removable/Adjustable Cheekrest (3/8”)
• Non-Slip, Removable Buttpad
• NEW 3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad
• Slot for Tactical Sling Attachment
• Can Be Fired From Folded Position
• Ergonomic, Textured Matching Pistol Grip
• Military Type III Anodized, 6061 T6 Aluminum
-- 6 Position Aluminum Commercial Buffer Tube
-- Aluminum Adapter
• Includes Steel Castle Nut & Steel Locking Ring
• Aluminium QuadRail front hand guard
• ATI Front Folding Pistol Grip
• Limited Lifetime Warranty on all stock and ATI accessories
• Fully meets 18 USC 922R Compliance and a letter to that effect is included with each gun.
These rifles are not legal in some communist areas of the country. Right off hand we will refuse all sales to anyone in the State of California and New York. There are other states with restrictions and it is not our job to know your local laws. If you have questions ask the FFL who will receive this rifle if there are any problems.
$35 Flat Rate lower 48 states
We accept some trades but on a very limited basis.
St. Petersburg Florida's low cost leader. Buy, sell, trade, new and used. We are a full service FFL manufacturer specializing in Saiga shotguns and rifles. All of our builds are finished with Cerakote brand ceramic firearms coating. Cerakote is the toughest and slickest coating on the market and assures you new firearm has the ultimate rustproof finish you can get. Attention to detail guarantees your new Saiga shotgun will shoot any low brass bulk pack ammo from the first range trip. Your new rifle will accept any surplus magazines including drums and function like every other AK style weapon on the planet. Rest assured if you have any issues with a firearm we have built for you that the problem will be fixed quickly and without any hassle to you.
Any custom built Saiga you see for sale here can be built using any additional accessories you may desire. We realize not everyone wants the same thing and are happy to build the weapon you have always dreamed of. As of December of 2013 our builds usually ship within 10 days to 2 weeks from time of your order. No games, no excuses, zero BS.