Description:
NO RETURNS
This listing is for the exact rifle in the photos. Note that it needs the attention of a professional gunsmith: one, its trigger is stuck in the fired position; two, its rear sight is missing a screw, three, its butt plate is chipped; four, it has extensive finish wear and mars to its stock; and finally, it does not have a magazine. Here is an attractive Remington 581 Rifle, the plain Jane version of the legendary 541S Custom Sporter. Manufacturer was Remington Arms of Ilion, NY. Catalog number was 9834. Production ran from 1967 until 1983 only. From its EO date code, it was manufactured in November of 1977. Barrel underside is importer stamped, forward of the magazine cap. Type is clip fed bolt action rimfire target rifle. Magazines are readily available from Triple K, we even stock them frequently but were out at press time on this ad. Construction is steel metal, with American hardwood stock: only the sight shroud and butt plate are polymer. Caliber is .22 Short, Long, or Long Rifle, and barrel is so marked. Barrel is 24 inch one piece medium tapered, .615 outside diameter at the muzzle; .625 osd at the forend. Muzzle is round crowned; and rifling is six groove right hand 1:16. Magazines came in 5 and 10 round variants. Sights are dovetailed front blade, and shroud protected screw on rear that is windage and elevation adjustable. Receiver has 1 inch plus 2 inches of 5/8 grooves for scope rings. Bolt is three piece with dual extractors, exactly the same action as the 541S Custom Sporter, a point we never failed to make when we had these in their racks in our store 40 years ago. Trigger is .325 smooth faced steel, we think it is complete but frozen in fired position. Safety is right side of the bolt, forward fire and rearward safe. Stock is one piece hardwood, with 1 1/2 by 3 inch drop past the Monte Carlo; 13 3/8 inch length of pull; and 3/4 inch right hand cast. Overall length is 42 3/8 inches. Weight empty is 5 pounds 7 ounces, centered 1 inch forward of the breech face. Finish is brushed surface blued steel, gloss black polymer, and semi-gloss finish stained hardwood. Apart from its missing magazine, chipped butt plate, and missing rear sight screw, surface detractions on this Remington are minimal to moderate on the metal, and moderate to extensive on the wood. Metal has edge wear and occasional finish freckling. We rate this rifle as Good Condition but mechanically incomplete, 70 percent vicinity by our estimate. Photos, at any rate, ought to suffice for our distinguished shoppers to judge finish grade for themselves. This rifle in top condition ought to fetch upwards of $500. We estimate $125 to $150 to replace the rear sight screw, correct the trigger jam, replace the magazine and butt plate; and refinish the stock. We’re offering it, then, for only $ 199.00. Any ammunition or personnel in photos are Not included.
Condition:
Used, Minor Wear
Brand:
REMINGTON
Model:
9834 4046654004397
Caliber:
.22 Long Rifle
Item #:
994604507
Stock No.:
LG7067
Location:
TN
Trades Accepted: Yes.
Shipping Notes: $20 lower 48; $60 AK, HI, PR, UPS or USPS. No Returns on NIB, Lay-away, or Ammo. Lay-away OK, 20% down, 90 days to pay. We Buy, Sell, or Trade we always have, since 1952.
Don't let your buddies use your account. Registered user must be the buyer, with his or her own money. Buying firearms and related items for other people can result in felony charges. Don't try, either, to circumvent any law; for example, a California civilian may not buy a high capacity magazine and have it shipped to his brother-in-law in Nevada. That is a felony.
GA Pay buyers are NOT charged until we confirm we have the item and are ready to ship it. The same thing is true for phone-in, fax-in, and mail-in payments. In this respect, and in several others, Guns America outshines all its competitors. This is the best firearms website there is, hands down.
