Items Available For Purchase Today REAL AVID BORE BOSS 357/38/9MM $12.99 SELLER: DEGuns_net MAGPUL AR-15/M4 Armorer's Wrench $84.99 SELLER: DEGuns_net Allen BoreNado 12Ga Barrel Cleaning Rope... $6.99 SELLER: DEGuns_net Allen 70588 Bore-Nado Cleaning Rope 243 ... $11.99 SELLER: DEGuns_net X-Stand Gutting Gloves 20-Pack $3.49 SELLER: DEGuns_net Remington Accessories 17459 Field Cable ... $29.99 SELLER: DEGuns_net Otis Technology .270/6.8MM Cal Ripcord $14.99 SELLER: DEGuns_net Kleen-Bore K206 Classic Cleaning Kit .26... $31.99 SELLER: DEGuns_net Gunslick Ultra .40-.45 Pistol Cleaning K... $9.99 SELLER: DEGuns_net DAC 38257 UNV PSTL CLEANING KIT CLAM 14P... $13.99 SELLER: DEGuns_net Otis Technology .338 Cal Ripcord $14.99 SELLER: DEGuns_net Wheeler AR15 Upper Vice Block Clamp $39.99 SELLER: Discount Tactical Supply Non Guns Gunsmith Tools Supplies Sight tool for front and rear sights on handguns | 827 | 0 | ?t=&sft=<id=&co=&og=&ong=&to=&lid=&cid=827&as=&mn=&mx=&f=&ca=&ffl=&oi=&dn=&zipcode=&distance=&limittostate=&pagenum=1&numberperpage=12&sort=&local=&sold=0&sku=&upc=&bl=&gf=&ff=&distributorid=&manufacturer=&model=Lc | 31.2381ms See All Sight tool for front and rear sights on handguns For Sale from: Dafish | Positive feedback: 100% View | Verified Seller | 149 Completed Sales View Sellers Items Sight tool for front and rear sights on handguns For Sale from: Dafish | Positive feedback: 100% View | Verified Seller | 149 Completed Sales View Sellers Items Dafish Seller Since: May. 2011 Identity Verified ( El Cajon, CA ) This seller is NOT an FFL City: El Cajon State: CA SOLD - $59.00 Add To Cart Buy It Now Shipping: See Description Accepted Payment Methods: Returns: No Returns Description: Works on, Glocks, 1911's, XD/XDM (with optional blocks) additional $8 ea set Sig's, M&P Pretty much any handgun. I also offer optional blocks for the 92F Keep in mind that some sights are machine pressed very tight, and may require soaking the base with penetrating oil for a day. Always push the sight out in the opposite direction it was installed, you may see marks on the slide cut from the original installation or you can check with the Manufacturer. The tool is easy to use, shim slide with washers to get proper height before clamping. Bottom aluminum block can be removed for front sights. You can also view additional info and video @ Here are the instructions for use, 1. Wrap slide with cleaning patch or another suitable material to protect slide surface. 2. Insert slide between clamp blocks aligning sight base with sight blade, if needed use washers under slide to achieve correct height. 3. Tighten wingnut to secure slide. 4. Use a 3/4" wrench to turn adjusting bolt, this will move the sight blade To achieve proper clearance for front sights take out the shim block by removing the screw under the sight tool and follow steps 1 - 4. Lightly oil the adjusting bolt and tool frame periodically to prevent rust and insure smooth operation. Note: Some sights can be very difficult to budge and may require soaking the base in penetrating oil for 24 hours. In some cases a Gunsmith may need to break the sight loose. Condition: New In Box Item #: 940278686 Location: CA Trades Accepted: I accept Checks or Money orders or Paypal at () Qty: 4 Available Share: Shipping Notes: Free shipping in the US, I accept Paypal, MO's and Checks. Items You've Viewed Recently Sight tool for front and rear sights on... $59.00 SELLER: Dafish Add To Cart
