Optics/Sights

Nightforce has done the seemingly impossible. To understand the truth of that statement, you have to consider that, rather than compete with the big scope manufacturers that produce a broad range of products, Nightforce has focused on producing high-end scopes. Although one scope may look much like another on the outside, what’s on the inside is another story. There are many elements which go into producing the image that you see when looking downrange. Change one element, and it affects all the others. Such a small thing as the tiny spring that maintains pressure on the windage and elevation adjustments receives critical attention at Nightforce. Night Force5The company wants this part, like all of the others that go into making one of its scopes, to operate smoothly and positively for life.

Vortex Optics www.vortexoptics.com Two New Red Dot Sights from Vortex, Plus Updates to the Razor Line of Rifle Scopes—SHOT Show 2014 If you’re not familiar with Vortex, they’re an optics company in central Wisconsin. The operating philosophy is to take care of their customers. As you would expect, their customer service is great. In fact, [...]

Electronic imaging systems are coming into their own and were much in evidence at this year’s SHOT Show. American Technologies Network, Corp., better known as ATN, has been developing night vision and thermal imaging optics in California since 1995. They introduced a new, high-tech thermal imaging weapons sight, Thor, in 2011. This year, they have an offshoot of Thor—Tico—intended to be used as a clip-on device with daytime scopes such as the ACOG. It has the same features as Thor and has four memory slots that allow you to tune it to different platforms/calibers. Tico starts at $6,195. Also, the X-Sight is a new standard nightvision without a tube. It relies on video imaging, and can record your action, for under $700. Check these ATN products out!

The new package from Aimpoint comes with a Micro, the LRP mount (which pops on and off with a lever), and the Micro Spacer High to get that perfect AR fit. Rock it up on your shoulder, and the dot is there. It increases the speed of target acquisition, the mount and riser are as rugged as the T1 itself, and the whole combo makes shopping that much easier.

Leupold has long been associated with quality scopes at reasonable price points. In the words of their founder, Fred Leupold, “the customer is entitled to a square deal.” That remains a guiding principal as Leupold continues to develop and improve their line of scopes. They had an improved Delta Point 2 reflex sight for handguns and shotguns at their show booth, but their biggest news this year was the brand new VX-6 7-42x56mm rifle scope. It is so new, in fact, that the design hasn’t been completely finalized. Here’s what we know: it’s the highest variable power scope they’ve ever made, it has their Extended Twilight lens system for increased light transmission, the MSRP will be in the $2,200 range, and they expect to start shipping scopes in 4-6 weeks.

Meopta’s sight called the M-RAD, or Meopta Rapid Acquisition Dot, reflex sight looks similar to many high-end reflex optics, but what stands out is that it is quite a bit smaller. At first glance, I thought it was a pistol sight but then realized it is a combat rifle setup. The M-RAD weighs 3.07 ounces (or 105 grams), compared to an EoTech XPS that weighs 8 ounces, but it is solidly made of aluminum. The unit is strong, and the reticle itself is surrounded by an aluminum frame for protection from being banged around. Weight is important because after hours or days of carrying a rifle around, you will find that trimming off every ounce you can is a huge benefit. It comes equipped with a picatinny mount that quickly attached with a lever/cam-style mount that was very effective and kept it on tight. It released easily, and seemed to keep zero well. The M-RAD is easy to operate with one simple button, and the system is waterproof and compatible with night vision technology. The extremely useful support package supplied with the sight holds everything, including tools, spare batteries and cleaning supplies for the optic. There are additional spacers to raise the sight higher for a proper sight picture, tools to adjust the sight and even a specially designed screwdriver for opening the battery compartment. Overall, this is a smaller unit that is both rugged and lightweight, and it performs well.

In 2007, Aimpoint set the bar high for the micro red dot sight (MRD), which was then new to the market. Until then, military grade red dot sights were fairly large, consisting of a wide 30mm tube with a battery compartment slung off the side. While very effective in combat and in the civilian hunting and shooting sports, they added bulk and weight to the firearm. This proved cumbersome, especially for competition shooters mounting red dots to their pistols. When Aimpoint launched its Micro Red Dot series, it took all the reliability, durability and long battery life of its proven larger red dots and crammed it into a small, light-weight package.

Originally Aimpoint had three micro models, the T-1, H-1 and R-1. All three shared the same physical dimensions, weight and operating controls, but they were intended for different applications. The T-1 was designed primarily for a military and law enforcement application, while the H-1 and R-1 were intended for the American hunter and competition shooter respectively. As the R-1 has been discontinued and the primary difference from the H-1 is the color (silver instead of black), this article will only address the T-1 and the H-1. The different specifications between the T-1 and the H-1 are their availability of night vision settings, operating temperature ranges, water resistance and color. The military and Law Enforcement T-1 has four night vision settings and is rated for operation in -50 to 160 degrees Fahrenheit. It is also submersible to 80 feet. These extra features come at a premium, and the T-1 commands a higher price point than the H-1. The H-1 looks like the more expensive T-1, but it lacks the night vision settings, has an operating temperature range of -20 to 140 degrees Fahrenheit and is only submersible to 15 feet. The H-1 also has more distinct manufacture and product markings than the T-1.

Introduced at SHOT Show 2011, the Aimpoint Patrol Rifle Optic (PRO) entered the competitive red dot market with a host of features designed specifically for the Law Enforcement Officer (LEO). Aimpoint, which has been in the red dot business since 1974, took its years of experience as well as input from LEO professionals to create an optic that is optimized for the LEO mission field and the LEO wallet. The features of the PRO are vast, and while Aimpoint has other red dot optics in its product inventory that may appear comparable, none could match the MSRP of $440.

The catch, at the time, was it was specifically made for LEO and could only be bought from an authorized Aimpoint Dealer. Of course with that kind of price point for a top-notch optic, everyone wanted to get his hands on one (or four). The general public was initially frustrated by the lack of availability, but Aimpoint wanted to make sure the LEO community was the first to get the PRO. Some civilians (like me) were able to get the PRO from other sources a few months down the road, but pickings were slim and disappeared very quickly. Eventually, like everything, the mystique of the optic and its “unobtainable” status faded away. Aimpoint now offers the PRO as part of its commercial line, available to the American shooting public. Even as we enter 2014, the Aimpoint Patrol Optic is still one of the most affordable, well-rounded and robust red dots on the market. I have used red dot optics that are lighter and smaller, but for my money it is hard to beat the PRO for what you get.

Thanks to modern manufacturing processes, today’s rifles have accuracies of one to two minutes of angle right out of the box. However, if you want to realize that potential, you’ll need a scope that’s in the same ballpark. The hard part, of course, is deciding which of the multitude of scopes in the marketplace is best for you. After all, they all look pretty much the same. But when you look a little closer, the differences begin to emerge. I don’t generally get too excited about scopes, but as an astronomy buff and licensed optician, when I get to use an optical instrument of this caliber, it’s hard not to get excited.
Meopta, an American family-owned, multinational company with headquarters in the US, has been building scopes since 1933. Although the company is not well known here, you’ve certainly heard of some of the premium scope makers it has built scopes for. The point is, Meopta has a lot of experience manufacturing top-of-the-line scopes.