The tooling on the belt matches the tooling on the holsters.
We’ve been spending some time with the local SASS crew here in Fort Smith, Arkansas–a town steeped in its western heritage. Fort Smith is the setting for True Grit, and countless other western tales. At the edge of Oklahoma, and butting right up against the Cherokee Nation, Fort Smith is a natural place for cowboy action shooting. And the sport is alive and well at the Old Fort Gun Club.
We showed up at a recent practice shoot to do some work with a pair of Ruger Vaqueros. These stainless shooting irons are a matched set, with many of the enhancements folks make to their revolvers already complete. They’re competition ready. And quite impressive. But you won’t look the part without a nice pair of holsters. When we set up the review with Ruger, we called the good folks at El Paso Saddlery and asked them to send us a holster. They could have just stitched up some leather, but that’s not El Paso Saddlery’s style.
Floral and exceptionally well finished.
Instead, they sent this rig. You should have been there when we opened the box. The glow coming off the leather seemed to cast its own light, and I swear I could hear Streets of Laredo playing somewhere in the distance.
What to look for in a Cowboy Action holster
There are some obvious points to consider. The holster has to fit the gun. As we’re almost always talking about leather, there will be some natural give. Oak tanned cow hide is the natural choice for most holsters, as it is stiff but will conform to the shape of an object. It also takes tooling well. More on that later. Some holsters even have steel shanks to help them retain their form, or–like these–have a thin steel liner that’s even more effective.
The holster should provide enough hold and enough give. You need to draw fast, but you don’t want the gun bouncing out of the holster. SASS sometimes has some movement involved, so some basic level of retention is a bonus. A leather thong looped over the hammer works. Just make sure it doesn’t get in the way. If you catch the hammer on the loop coming out of the holster, things could get ugly.
[full_width]
Hornady .45 Colt tucked into the cartridge loops.
[/full_width]
The old-school battle belt: truly customized to the shooters needs.
After function, it is all style. Actual historical holsters were made from whatever was on hand. Cow, elk, horse, buffalo…. Some were exceptionally ornate. Like whalers and scrimshaw, and WWI soldiers who made trench art out of brass shells, the old cowboys had a lot of time on their hands to decorate their holsters. It is an expression of individual style, and modern SASS shooters are just as into the practice.
The holsters I admire most are built into belts, and have knife sheaths, extra holsters, bullet loops…they may even have a second belt that holds extras, like shotgun shells. As most of the rifles and pistols share the same chambering, the bullets will fit both guns. In short, these are epic tool belts that should hold everything you might need. You don’t have to look far to find the modern equivalents, though they’re typically not leather.
Note the leather block behind the holster to push the grip out from the hip.
The holster itself should pitch the gun off at a bit of an angle. Many of the SASS shooters I’ve known brace their guns out from their hips by placing leather shims between the leather that folds over to form the holster. The more shims, the steeper the angle. And all of this is just decoration if you don’t tie the holster to your leg, or have a really loose fit.
The El Paso Saddlery Holsters
This is a fully carved Hollywood Fast Draw Double Holster Rig. I think the name is fitting. It has roots in historical tradition, but looks more like something you’d find on the set of a 1930s Hollywood extravaganza. It is beautiful. All or the carving is done by hand. This is a process that takes time. You have to wet the leather, and then tap stamping tools in some places, and run an actual chisel around other places. Essentially you press in the wet leather in intentional patterns, and it will stay in place as it dries. Leather work is a craft–carving is an art form. This is a skill that takes years to master, and the holster here is a fine example. How much does a beauty like this cost? $558. That isn’t cheap, but this is an heirloom of sorts that will only get better looking as it breaks in, and if you take care of it right, it will last longer than you. Holsters don’t have to cost this much. They don’t have to look this good and work this well, either.
Drawing both guns at once is easy. Shooting both single actions at once is not.
The fit is exacting. This was made for the Vaqueros with 5.5″ barrels. The belt itself has been stitched around the edge. Some of the stitching is more decorative. The smooth (grain) side of the leather (as opposed to the rough split side) needs to be on both sides of the holster, and belt–so two splits are glued together (rough to rough) and then stitched up. The contrasting white on the natural tan of the leather makes for a great flourish.
The holster could be dyed to match any color, but the natural will darken slowly as it is exposed to light and oil. It is almost impossible to convincingly fake the well work look of leather that has been well cared for and well used. Sweat does wonderful things to leather, or the look of it, but you’ll need the oil to keep out the salt.
How much play do you need in the belt? Hopefully not much.
The buckle on this is attached to the larger belt by two smaller strips of leather. In the long term, this may allow you to do more to adjust the sizing, as you can make these slightly shorter or longer. If you get a lot bigger, you’ll need a new holster–otherwise belt extensions are going to position your guns farther and farther behind your back.
Regardless of how you go, El Paso Saddlery can make functional gun rigs that fit. If you want cowboy bling, that’s in their wheel-house. If you would rather have a more pedestrian holster set, one that you can customize yourself, that’s easy, too. Once holsters are glued and stitched up, though, they are hard to tool. Keep that in mind. If you want something with that Spanish flair, or a set of deeply carved floral holsters–better to pull the trigger on that from the start.
And if the cowboy thing isn’t your speed, El Paso makes shoulder holsters, cross-draw, IWB concealed carry holsters, and a full assortment of military styles. And they make incredible 1911 rigs, too. From the historically accurate down to the Hollywood rigs, to the competition specific gear, El Paso does it all.
[one_half]
Steel-lined to help the holster keep its shape.
[/one_half][one_half_last]
Even the back of the belt and inside of the holster are lined with grain-out leather.
[/one_half_last]
[one_half]
The El Paso Saddlery log is small and innocuous.
[/one_half][one_half_last]
The holster rides in a cut out in the belt. All edges are stitched for extra strength.
[/one_half_last]
[one_half]
Left side of the fully carved Hollywood Fast Draw.
[/one_half][one_half_last]
Right side of the fully carved Hollywood Fast Draw.
[/one_half_last]
[one_half]
Loop over the hammer for extra retention.
[/one_half][one_half_last]
Don’t leave the loop dangling, though, as you may catch it on the hammer.
[/one_half_last]
[one_half]
I found drawing the holster with the loop in place to be very difficult. Don’t forget this step.
[/one_half][one_half_last]
[/one_half_last]
[one_half]
I am a true right handed shooter, so drawing form the left and switching to the right was cumbersome.
[/one_half][one_half_last]
Getting the tension balanced on these loops isn’t as easy as you might assume. When they work correctly, it is because someone was very patient when building the holster.
[/one_half_last]
[one_half]
Made for a 5.5″ Vaquero. Says so right here. El Paso Saddlery makes some incredible leather holsters.
[/one_half][one_half_last]
I was pushing the limits of the belt.
[/one_half_last]
[one_half]
Drawing is as easy as it is from any holster, and much easier than some more modern holsters.
[/one_half][one_half_last]
The gun drops in perfectly as it was made specifically for a Vaquero.
[/one_half_last]
[one_half]
Gratuitous ass shot meant for illustrative purposes, only. The guns ride just off the hip, easy to reach with either hand.
[/one_half][one_half_last]
The height of the pistol is lower than where most of us carry OWB.
[/one_half_last]
[one_half]
Badges? I don’t have any badges on my holster.
[/one_half][one_half_last]
The cut should still allow access to your pockets.
[/one_half_last]
[one_half]
The Fast Draw has a low front that is cleared easily.
[/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
[one_half][/one_half][one_half_last][/one_half_last]
You mentioned they’re metal lined, how does the stainless finish stand up to the metal lining? Contemplating a metal lined one but don’t want to damage the Finish of the pistol I’ll use in it
Great looking holsters. The only thing I would say is that the small holster retainer straps are backwards. The buckles should face forward.
The buckles on your holsters are consistently backwards. That protruding leather tongue will hang up on anything you walk bye. Reverse that design and let that leather tongue stick out on the trailing edge. Just saying.
You’re right on the buckle, I checked all 3 sets of mine, various makers and all are tongue to the rear as it should be…..Two are riveted on and one is through a slot on the holster and could be turned around. Wonder if these are that way and got put through the slots backward? I don’t use these holsters now as I shoot a different class in SASS.
I can’t believe you are wearing Levi’s! They are known for being a major anti-gun corporation.
I need a SOB right hand holster tan for a1911 Kimber PRO AEGIS CUSTOM SHOP 4in 9MM
Try these guys. They made a custom SOB for my Kimber Raptor Pro. It’s the best holster I own.
CraftHolsters.com
just looked up that rig on their site. It’s now $614!!! Guess the cost of cows went up!!! Sure wish there was a way to post pictures of my double rig, made for me on March 16th, 1972. Still have it, 44 years later.
Mernickle holsters Fernley Nv
Hello:
Do You build a holster to fit a 44 Walker? It is a large gun, and I can not find a holster that fits it right.
Orris
The old school rig in the pictures is more authentic with the loop folded over the belt, while this particular El Paso drop leg holster rig is specially designed for fast draw. Real cowboys wore their pistols up high like we do today. El Paso makes both, and the work is high quality. Another maker is Purdy, who makes exquisitely crafted and historically accurate rigs, from black powder Slim Jims up to rigs for 1911s, or any rig to your specification.
How about some prices !!!!