New from Nikon: BLACK FX1000 Riflescopes

Authors Industry News Thomas Gomez

Expanding on their successful BLACK line of optics, Nikon has once again raised the bar with the Nikon BLACK FX1000 series of riflescopes. The Nikon BLACK FX1000 are first focal plane riflescopes that feature Nikon’s proprietary etched FX-MOA and FX-MRAD reticles.

Not only are the scopes optimized for hold-overs, but they also have Nikon’s High-Speed Turrets with Integral Zero Stop which allow an end user to dial 25 MOA/10 MRAD of adjustment per revolution.

Product Line

  • BLACK FX1000 4-16x50SF FX-MOA (MSRP – $649.95)
  • BLACK FX1000 4-16x50SF FX-MRAD (MSRP – $649.95)
  • BLACK FX1000 4-16x50SF Illuminated Reticle FX-MOA (MSRP – $749.95)
  • BLACK FX1000 4-16x50SF Illuminated Reticle FX-MRAD (MSRP – $749.95)
  • BLACK FX1000 6-24x50SF Illuminated Reticle FX-MOA (MSRP – $799.95)
  • BLACK FX1000 6-24x50SF Matte Illuminated Reticle FX-MRAD (MSRP – $799.95)

The Nikon BLACK FX1000 scopes start at around $650. In my opinion this an absolute steal! First-focal-plane, 30 mm scopes, with an etched holdover type reticles and “rapid turrets” tend to command a much high price point.

SEE ALSO: Nikon BLACK RANGEX 4K Laser Rangefinder – Full Review

I have one of the original Nikon BLACK X1000 riflescopes, and it has been absolutely fantastic. Tracking, parallax, edge-to-edge clarity are all top-notch.



If you are on a budget and looking to get into long range shooting, take a look at these scopes. If you want to start shooting National Rifle League or Precision Rifle Series matches, take a look at these scopes. And, even if money is no object, still, take a look at these scopes!

In a nutshell, everyone should take a look at these scopes.

New from Nikon: BLACK FX1000 Riflescopes

The BLACK FX1000 feature Nikon’s High-Speed Turrets with Integral Zero Stop which allow an end user to dial 25 MOA/10 MRAD of adjustment per revolution.

Question: Do you need a first focal plane rifle scope?

Something to consider with first focal plane riflescopes is that the reticle will shrink as you dial down magnification and increase as you dial up. This is awesome if you like to hold for shots, but at lower magnification, the reticle may be hard to see.

SEE ALSO: First Focal Plane Riflescope vs. Second Focal Plane Riflescope

Out here in the West, where I typically hunt and shoot, my scope typically stays at a high magnification. Back East in the heavy forest, hunters will dial down magnification for a wider field of view.

As mentioned, with a first focal plane scope you might have a hard time seeing your reticle. If you prefer a second focal plane, then Nikon still has you covered with the BLACK X1000 series. Fantastic scopes!

Whether you’re in the market for first or second plane scopes, visit NikonOptics.com.

Leave a Reply

Your email address will not be published. Required fields are marked *

  • DrThunder88 March 24, 2018, 8:25 am

    I’m not seeing anything particularly special in that reticle. It looks like a pretty standard mil or MOA hash. With a description like “holdover reticle”, I was expecting a bit more of a grid.

  • Tim March 23, 2018, 6:00 pm

    First focal plane scopes are a gimmick that everyone thinks they need in order to keep up with the Joneses when its completely useless. I guarantee that NO ONE is ranging their targets with their reticles, they are all using range finders (and why wouldn’t you? A range finder is accurate and fast) Even if someone was using their reticle to range a target I can also guarantee you that they are dialing their scope up to the highest magnification in order to get an accurate measurement…they aren’t ranging targets at 4 power I can tell you that…So whats the point of a reticle that changes size on you again? On low power scopes like a 1-4, 1-6..ect they make even less sense. Why on earth would you want a reticle that squishes up to a blob on 1x power and then only becomes useful again at 4x or greater?

    • Shane March 25, 2018, 7:11 am

      What if your spotter tells you to hold 3 mils on the second shot as you missed the first? Are you going to take the time to dial that into your scope or rely on your FFP reticle, thus saving time and keeping your eye on the target? Just a thought

  • Kevin March 23, 2018, 9:50 am

    BBS53 I’m with you man! Gimme a fixed power and I’m sold. Every deer rifle I own has a Lupold FX4 on it. The far fewer lenses required for fixed power allows exponentially more light to reach your eye. They turn twilight into daylight! When are deer most likely to show themselves….twilight!

  • joefoam March 23, 2018, 8:37 am

    I own several Nikon scopes. If these new models offer the same quality and value as my current ones I’m interested.

  • bbbs53 March 23, 2018, 3:38 am

    Make it in a fixed power, like 6 and they might have something. Variables are a compromise and just one more thing to go out of whack. Use your binoculars for spotting and your scope to aim.

Send this to a friend