Ultralight .308 – The POF Rogue: SHOT Show 2020

Ivan Loomis SHOT Show 2020 SHOT Show Archives
Ultralight .308 - The POF Rogue: SHOT Show 2020
POF introduced their brand new ultralight Rogue in .308.

For more information, please visit Patriot Ordnance Factory.

If you are a fan of the 7.62×51 (.308) but like the smaller form factor and lighter weight of the AR-15 platform over the AR-10, Patriot Ordnance Factory has an option for you.  This year at SHOT Show 2020, POF introduced their Rogue .308 Rifles and Pistols.

Ultralight .308 - The POF Rogue: SHOT Show 2020
The Rogue’s receiver is minimalist in design. Any material that isn’t needed was removed to reduce weight.

Think of it as an AR-15 chambered in .308.  Rather than scaling everything up to an AR-10 platform, they remade the upper and lower receiver, largely just changing the magazine well dimensions and using a 7.62 bolt.  This reduction in size translates into a much lighter and handier package.

The Rogue Rifle featuring a 16” barrel and Rogue Pistol with a 12.5” barrel — weigh 5.9 and 5.7 pounds respectively.  And since the bolt has less mass than an AR-10, the recoil impulse is said to be less as well.

Ultralight .308 - The POF Rogue: SHOT Show 2020
The receiver end plate has a built-in QD socket.

While I didn’t haven’t had a chance to shoot them yet, I’m looking forward to getting my hands on one.  Anyone that spends a fair amount of time on the range, or carrying a rifle into the backcountry, knows how heavy a gun can get in a hurry.  The fact they have been able to shrink the size and weight as much as they have is incredible.

Ultralight .308 - The POF Rogue: SHOT Show 2020
On the right and left side of the rail is an additional QD socket.

The POF Rogue will available Q1 with a MSRP of $1799 for the rifle and $1849 for the pistol with MAP being $1699 and $1730 respectively.

For more information, please visit Patriot Ordnance Factory.

Buy and Sell on GunsAmerica! All Local Sales are FREE!

Leave a Reply

Your email address will not be published. Required fields are marked *

  • Daniel K SLOUGHTER March 11, 2022, 10:32 am

    The only real questions I would have are: Is it 100% “Mil-Spec?” and They only state that the receivers are “Forged”, nothing else. Forged from what? I mean yes, it’s an AR10 and one would expect it to be 7075-T6. However, when it is clearly and intentionally missing from every ad and spec-sheet you have to question it. When you start “assuming”, that’s when you get screwed!

  • Ean February 13, 2020, 6:15 pm

    DPMS did this years ago with the GII.

  • Warren Wilson February 4, 2020, 12:19 pm

    I’ve been saying to do this for years!
    Now when do we see the AR-10 in .50 BMG?

  • Ray McGaughey February 4, 2020, 8:50 am

    POF may have hit a home-run with this. If they are able to withstand the pressures & recoils without cracking receiver components, the short action cartridge possibilities are endless. Why would you carry a 6.5 Grendel when you could carry a 6.5 Creedmoor in the same weight ? I’ll be keeping an eye on this.

Send this to a friend