Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

AR-15 Authors Gun Reviews Jordan Michaels Rifles
Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

Rock River Arms has been manufacturing premium AR-style rifles since the 90s, but this year they released their first entry-level model.

When it comes to AR-15 platform rifles, 2019 is the Golden Age. Nearly every major firearms manufacturer has their spin on the legendary design and hundreds of boutique companies offer high-performance parts (or “high-performance parts,” as the case may be) for those looking to trick out their build.

The proliferation of small-time AR companies has its downsides, however.

My brother-in-law convinced me to build my first AR, but I spent more time clearing jams than shooting. After replacing the buffer, buffer spring, extractor, bolt, bolt carrier group, and gas block, I finally determined I had a bad chamber. I played ring-around-the-Rosie with the manufacturer until they agreed to sell me another barrel at-cost, though they always maintained there was “nothing wrong” with the chamber and it “cycled fine” when they tested it.

Whatever.

If you’re new to the AR world, where have you been? Also, you might consider buying a complete rifle rather than building your own. I’ve built ARs after that first debacle and they’ve worked fine. But buying a complete rifle from a reputable company might save you some serious troubleshooting.

Bargain bin ARs are a dime a dozen, but if you’re looking for a more premium option at a great price, check out the new RRAGE Carbine from Rock River Arms. The RRAGE is the newest iteration of Rock River’s LAR-15 series, but it hits a slightly lower price point than its predecessors—without sacrificing quality or performance.

Rock River Arms?

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

RRA produces all their firearms in Colona, Illinois.

Rock River Arms has been around since 1996 when brothers Mark and Chuck Larson founded the company in Cleveland, Illinois. The Larson’s had been in the firearms industry since the early ’80s but decided to start their own business manufacturing high-quality 1911 parts and they soon expanded to complete handguns.

The brothers jumped into the AR market in the late ’90s, and now the company offers the “LAR” series in a wide variety of made-to-order configurations and chamberings.

In 2003 Rock River Arms put their hat in the ring for a Department of Justice contract administered by the Federal Bureau of Investigation and the U.S. Drug Enforcement Administration. They were the only company to complete all stages of the trial without having to reshoot, and even though they weren’t the lowest bidder, they won the five-year contract. Today, the company still makes products for a variety of DOJ agencies.

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

The RRAGE benefits from Rock River’s years of experience manufacturing premium AR-15s.

As you might expect from a company that produces firearms for the feds, these aren’t entry-level rifles. Their standard Mid-Length A4 LAR-15 runs on the business side of $1,000 MSRP, depending on the configuration.

Fortunately for those of us on a tighter budget, RRA announced this year their RRAGE Carbine, a less expensive version of their super-reliable rifles that benefits from the same quality control and attention to detail as all of their products.

Cost Cutting?

Whenever a company offers a less expensive version of a usually expensive product, customers (rightly) ask, “How?”

I posed this question to Steve Mayer, one of RRA’s lead product developers, who kindly gave me a half-hour of his day to get into the weeds on the RRAGE.

Mayer explained that RRA’s forte has always been custom, made-to-order rifles, but they wanted to take advantage of economy of scale to offer customers a more entry-level option. They manufacture the RRAGE in 150-200-rifle batches, which allows them to cut machining and labor costs.

He also noted that the upper receiver is constructed from 6061 aluminum rather than 7075 T6 aluminum. The former, cheaper kind of aluminum is usually used for accessories, but after testing, RRA determined that it could also be used for an upper receiver without any negative consequences.

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

Both the upper and handguard are constructed from 6061 aluminum.

“The upper is pretty much just a conveyance. It’s something for the carrier group to move back and forth in. The barrel sees all of the stresses,” he explained. “When the steel of the bolt rotates into the barrel extension, there’s no stress [on the receiver] in that action.”

RRA saves additional cost by using a production method called “extrusion” to construct the upper receiver. Extrusion, Mayers explained, offers similar durability as forging or billeting but saves on labor and machine costs. Rather than being hammered or carved, a block of aluminum is forced through a die that creates the desired shape. The process cannot incorporate as much detail as the other methods, but it provides high quality for lower costs.

Mayer clarified that RRA has no intention of cutting corners to offer the cheapest rifle on the market, and they still use the same barrel, bolt carrier, lower, and trigger group as their most expensive options.

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

Besides the upper, RRA uses the same parts on the RRAGE as on their more premium rifles.

“The RRAGE still has most of the same components we use on our custom builds,” he said. “We don’t shortcut to put out an economy model. We have no intention of racing to the bottom. We don’t want to fight for that spot. If other people want to come in with lesser parts, then they can have that part of it.”

The result is a super-reliable, mid-level AR with clean lines and solid accuracy, to boot.

Testing

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

Shooting the RRAGE was a pleasure — it’s lightweight, accurate, and it handles well.

As soon as I opened the box, I was eager to get to the range with the RRAGE. Though the majority of the rifle features basic, no-nonsense components, I immediately noticed the clean lines achieved by the RRAGE’s upper receiver/handguard combo. Most budget-friendly AR-style rifles use a standard receiver with a rounded or squared handguard, creating a small snagable space on either side of the receiver. RRA avoided this problem by manufacturing their receiver and handguard to match, which provides many of the benefits of a monolithic design without the added cost.

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

The RRAGE features a matched receiver/handguard, which gives the rifle a monolithic look without the monolithic price.

Beyond this, the RRAGE doesn’t come with any bells and whistles. It uses the same high-quality parts RRA features on their other rifles, but the muzzle device, pistol grip, stock, and trigger are all pretty basic.

CALIBER: 5.56MM NATO
LOWER RECEIVER: Forged RRA LAR-15
UPPER RECEIVER: Extruded aluminum A4 with port door/no forward assist
BARREL: 16-inch lightweight chrome moly, 1:9 twist
MUZZLE: A2 flash hider / 1/2–28 thread
GAS SYSTEM: CAR length, with a low-profile gas block
TRIGGER: RRA single-stage trigger
HANDGUARD: CAR-length free-floated aluminum with MS1913 top rail, M-LOK™ compatible
BUTTSTOCK: RRA six position tactical CAR stock
PISTOL GRIP: A2 grip
WEIGHT: 5.7 pounds
LENGTH: 36 inches stock extended
INCLUDES: One RRA 30-round polymer magazine, manual and warranty information
MSRP: $759.99

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

Muzzle device is the standard birdcage.

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

The stock is an RRA-branded model with a sling loop.

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

RRA uses the same bolt and carrier they use on their more premium models.

Without the extras found on other rifles, and at a slightly higher price point than a bargain bin AR, I expected the RRAGE to do two things: function flawlessly and produce acceptable accuracy.

The rifle delivered on both counts.

First, reliability. I used four different varieties of .223 and 5.56 throughout the course of my testing and the rifle ate everything I fed it (even the Russian steel case stuff). I shot off-hand and while standing, kneeling, and from prone, and I never experienced a malfunction. I also shot strings of rapid fire without a hiccup. There isn’t much else to say. The RRAGE rifle has obviously benefitted from over two decades of gunsmithing experience at RRA, and users can be confident it’ll go bang every time.

I conducted accuracy testing from the prone using a Caldwell Lead Sled. I mounted a Vortex Crossfire II 1-4x scope and took aim from 100 yards. The trigger is fine, but nothing to write home about. It weighs in at a hefty 7.5-8 pounds, breaks cleanly after some takeup, and resets audibly.

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

The trigger is the standard, single-stage RRA unit.

I chose four different varieties of ammunition, all of which used projectiles under 62 grains. Mayers told me that you might be able to get away with a 67 or 68-grain bullet (depending on bullet shape), but a 62-grain round is about the heaviest the 1:9 twist barrel can stabilize.

Brand Bullet Average Velocity (fps) Low Group (in) High Group (in) Average (in)
Hornady 55g HP 3030 .85 1.75 1.36
American Eagle 55g FMJ 2960 1.6 3.15 2.4
TulAmmo 62g FMJ 3025 ? ? ?
PMC 62g LAP 2940 1 1.95 1.50
Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review) Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review) Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review) Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

As with all rifles, accuracy fluctuated based on ammunition. The cheaper American Eagle performed more poorly than the higher-quality Hornady American Gunner and PMC X-TAC, and the TulAmmo performed so terribly I couldn’t even record group sizes.

Still, I wouldn’t call any of these cartridges top-of-the-line, so I was pleased with the groups from Hornady and PMC. That 55g HP shows promise, and if I wanted to develop a load for this gun, I’d start there. There’s some debate about how to interpret lone “flyers” that depart from a four-shot cluster, but discounting the two shots to the left of center in the uppermost targets shrinks the average to under one inch.

I was even more impressed with how the rifle responded to my next test. I dumped a few mags to heat the lightweight barrel and shot another group with the Hornady 55g loads.

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

That’s a 1.25″ group with a hot barrel. Not bad.

The point of impact may have shifted slightly but shot-to-shot consistency remained the same. I take this as a testament to the quality of RRA’s rifle components. My other budget-friendly ARs (so, all my ARs), lose their consistency when the barrel begins to heat up. Group sizes open up, and I lose confidence in my ability to hit my target. With the RRAGE, I know that even after a long day at the range, I won’t have to worry about the rifle’s accuracy. I can focus on doing my job and let the gun do the rest.

Conclusion

Premium AR-15 Manufacturer Jumps into the Entry-Level Game: Rock River Arms RRAGE Carbine (Full Review)

You’ll have to weigh the costs and benefits yourself, but I’m always on the lookout for firearms that check all the boxes without breaking the bank. The RRAGE does that. It’s manufactured by a company with an excellent reputation and a track record to back it up. It’s lightweight, well-built, and accurate enough to get the job done. Plus, I know it’ll last for years to come, which is a consideration given the state of politics in this country.

Bottom line: if you can find a good deal, I wouldn’t hesitate to snag one of these, get out to the range, and have some fun.

Leave a Reply

Your email address will not be published. Required fields are marked *

  • Adam July 15, 2019, 9:16 pm

    Nothing screams “experienced shooter” like resting a finger on an exposed gas block. And, sarcasm off, nothing screams RRA like making a free float tube short enough to expose a low profile gas block. I’d love to hear a functional reason for leaving the gas block exposed. It’s probably just there to burn fingers.

    Gunsamerica, please, get an AR guy to review an AR. This AR makes zero sense and your reviewer doesn’t even ask some of the obvious questions, like…

    -Why is the handguard so short?
    -What budget gun benefits from a billet upper when it costs them a forward assist and vice block compatibility.
    -How is that barrel lightweight when it looks .750″ profile for its entire length?
    -Why a 1/9 twist in 2019?
    -Why an unlined/untreated carbon steel barrel in 2019?
    -Why carbine gas in 2019?
    -What steel is the bolt made from?
    -Why even bother testing accuracy with a super budget 1-4x scope?
    -Why even bother testing accuracy with a shooter that casts doubts on his own groups when using a lead sled?

    If I could of been a fly on the wall during the brainstorming meeting for this AR. I bet someone said “All the refinement the AR has received in the last 10 years is rubbish. Except the billet upper, gotta have one of those.” I bet he received a standing applause.

    • Jordan Michaels July 23, 2019, 6:01 pm

      Hey, Adam. Thanks for your comments. All great questions. I can’t speak to all of RRA’s manufacturing decisions. They did just release an RRAGE rifle with a full-length handguard (link below), and their bolts are constructed of carpenter 158 steel.

      In terms of accuracy testing, I’ve found that a 1-4x scope is more than sufficient at 100 yards. The cost of the scope doesn’t matter as long as it stays were it’s supposed to. It’s difficult to remove the human element from accuracy testing (which was the intent of my comment below), but you can still see a clear difference between the cartridges. If a reader wanted to reload for this firearm, that would give them a place to start.

      Again, great comment. Thanks for the feedback.

      https://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_ID=1904

      https://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_ID=1335

  • johnnyraygun July 15, 2019, 9:27 am

    Interesting how you stated “There is some debate on how to interpret lone flyers”. Really, I was not aware of that debate. …… I counts as a shot, or as a missed shot, if you please

    • Jordan Michaels July 15, 2019, 1:26 pm

      I think the debate surrounds that word “missed.” Did I “miss” or was it the gun? I try to take myself out of the equation when I’m accuracy testing a firearm since I assume no one cares whether or not I’m a good shot. That’s why I use the sled. But if you’ve ever used a sled, you know it’s still possible to pull a shot. In that case, I don’t want to blame the gun (or the ammo), which is why I try to post pics of the targets and let y’all draw your own conclusions.

      ¯\_(ツ)_/¯

  • Ton E July 15, 2019, 5:12 am

    To this day I will never understand why a bigger AR15 manufacturer churns out a rifle that sports a 1:9 twist rate. At least do a 1:8 it’s the best of both worlds.

  • Dr Motown July 14, 2019, 8:50 am

    Love my RRA products….perform well, won\’t break the budget, and customer service is decent too

Send this to a friend