The JP5 From JP Enterprises – A PCC Unlike Any Other

Gun Reviews Rifles

The PCC market can be described as crowded. That’s a nice neutral way to say there are just tons and tons of them on the market. Most are 9mm, take Glock magazines, and use a straight blowback-operated system. Pretty simple and also very effective. Yet, JP Enterprises has released something a little different in the form of the JP5. The JP5 is a roller delayed PCC that makes both Stoner and HK proud.

JP Enterprises already has a rather big presence in the PCC World, specifically in the competitive shooting market. The GMR-15 is one of the most popular PCCs in the competition world. The JP5 should be seen as a follow-up to the GMR-15 in many ways. The main difference is going from a straight blowback system to a roller delayed system.

Why Roller Delayed?

Straight blowback works well. It’s reliable, simple, and easy to utilize in a PCC. The downsides are aplenty, though. Straight blowback guns often have excessive recoil, at least for a 9mm carbine. Straight blowback guns also have to use a heavy bolt or heavy buffer and buffer spring. It’s an unrefined system to operate firearms with.

The JP5 From JP Enterprises - A PCC Unlike Any Other
A roller delayed PCC in AR form has never been done before.

Roller delayed blowback systems utilize a set of rollers to delay the retraction of the bolt head. This delay allows pressure to drop to a safe level before the weapon cycles. The rollers of the JP5 eliminate the need for a heavy bolt, buffer, buffer spring and help decimate recoil levels. That’s exactly why JP Enterprises went with a roller delayed setup in the JP5. This system is famously seen in the MP5 series submachine guns, where it’s proven very effective.

Ergonomics for Days

The JP5 is more than a pretty operating system and a novel design. It’s a fully outfitted PCC designed to not just compete but to win. From the factory, JP includes fully ambidextrous controls. We have an ambi safety, magazine release, and bolt release that culminates into a fantastically ergonomic weapon.

The JP5 From JP Enterprises - A PCC Unlike Any Other
The JP5 comes with ambidextrous controls.

All of the controls are placed close together but still very easy to reach and use. It’s hard to miss these things when you start shooting fast and running hard. When it comes to reloads, we get a massive magazine release and a beveled magwell that makes it easy to keep the gun running with minimal interruptions.

The JP5 From JP Enterprises - A PCC Unlike Any Other
The ergonomics are spot on and well done, plus, ambidextrous.

Because the roller delayed system eliminates the need for a heavy buffer and buffer spring, the charging handle presents a light and sweet pull. The big ambidextrous Radian Raptor slides rearward with ease and without argument. Additionally, the JP5 is lighter than other similar PCCs. It weighs only 6.1 pounds in the PCC competition configuration.

Pewing Away

The first thing you’ll notice about the JP5 is how terrifically balanced the gun is. It’s super light, swings, and moves with ease, and feels shorter than it is. Once you pull the trigger, you’ll forget about all of that because the trigger, accuracy, and recoil impulse are all pristine. Let’s break those down one by one.

The JP5 From JP Enterprises - A PCC Unlike Any Other
Look at this beastly compensator!

The roller delayed system does absolute wonders to reduce recoil and create an extremely smooth shooting gun. It feels almost like a lightweight 22 Magnum rifle. Sure, there is recoil, but not much. Helping that recoil mitigate is the JP Competition series compensator. This massive chunk of stainless steel offers three huge ports that keep the gun down and on target as you sling lead.

The JP5 From JP Enterprises - A PCC Unlike Any Other
Blasting away with the JP5 is wonderfully smooth and light.

The trigger is the JP EZ Trigger. This single-stage AR 15 trigger results in a very smooth and very light trigger pull that’s consistently 4 pounds. It’s smooth, with barely any takeup before the bang. The reset is quick and noticeable, and it’s easy to fire rapid double taps with ease.

That trigger heps the JP5 remain accurate for sure, but the stainless steel 14.5-inch super match barrel also helps. It’s a light contour barrel, and the muzzle device is pinned and welded to bring the barrel length to 16 inches and avoid the NFA. Zeroing took no time at all, and I was excited to move from zeroing to more practical shooting.

Swinging Between Targets

I took the JP5 against a rack of gongs at 15 yards. The gongs ranged from 4 to 8 inches with a little IPSC fella in the middle. I mounted a simple red dot, and when you tack a red dot onto a gun like this, it’s all about speed. I did a simple drill where I ran through all four targets as fast as I could. Starting with the 4-inch gong, I ran the rack in about 3 seconds on the first try, but by the fifth, I dialed it down to 4 rounds on target in 2.8 seconds.

The JP5 From JP Enterprises - A PCC Unlike Any Other
The JP5 might be the most accurate PCC on the market.

That huge compensator combined with the roller delayed system creates such a soft shooting gun that the red dot never moves. You can swing from target to target between shots with ease. The JP5 barely moves, and it’s easy to rapidly and accurately spit lead. I ran a similar drill using the gongs and some clay pigeons on the berm. I devastated the ten targets with ease and continually saw my time drop by fractions of a second between runs.

The JP5 From JP Enterprises - A PCC Unlike Any Other
This handguard is positively awesome

Fifteen yards is nothing, so I moved from 15 to 25, then to 50 and even 100. At 100, I was still dropping 9mm rounds into an IPSC target’s A and C zones once I got the hold over down. This was in an unsupported, standing position. The JP5 is just damn easy to shoot and is oh so accurate.

Splitting Targets and Spitting Lead

Between the accuracy, recoil, lack of muzzle rise, and downright amazing ergonomics, I can’t help but love the JP5. It’s so much fun to shoot and so fast and accurate to engage with. I’ve done a wide variety of drills, including the Sage Dynamics Eleanor, Failure to Stop Drills, modified El Presidente drills, and more.

The JP5 From JP Enterprises - A PCC Unlike Any Other
It’s not cheap, and you feel the premium in the gun from the first shot.

I’ve taken it out with my kids and my wife, and it’s met universal acclaim among all who handle it. The JP5 takes the cake for new and smaller shooters more so than many of my other PCCs. It’s a super easy to shoot a firearm, and I can see why JP Enterprises captures so many professional shooters.

As you’d imagine, a gun packed with these features and a novel operating system makes it a pricey choice. This specific model costs about $3,200 bucks. It’s a high-end blaster that’s ready to compete with. Now I just gotta get myself to a steel challenge match.

***Buy and Sell on GunsAmerica! All Local Sales are FREE!***

Leave a Reply

Your email address will not be published. Required fields are marked *

  • BR August 12, 2022, 9:23 pm

    It would be really nice to see these PCCs in 10mm. Then they would be useful beyond “range toy”. $3200 for a range toy would become a lot more palatable for dual use.

  • Tom August 12, 2022, 6:33 pm

    “Decimate recoil…” So, you’re saying that this system only reduces recoil by 10 percent?

    That’s a lot of money for only a 10 percent reduction. I think CMMG is a much better option. I don’t want to “decimate” my wallet!!!

    “Decimate.” It’s an obscure, brutal sounding word for something of minimal effect. But it sounds GREAT! :)))

  • Damcowboy August 9, 2022, 12:38 pm

    $3,200 for a great running competition PCC is not a lot of money. Look at it this way, a semi serious competitor will shoot 1,000 rnds a month in training and competition. Plus match fees, plus travel, plus hotel if he is going to big matches. Just in ammo alone he is spending .17c/rnd if he handloads so thats $170/month minimum. Then match fees of $25 for a small local match, $200 + for a major match. He probably has a range membership at say $300/yr. So for a year thats around $3,000 minimum, just to shoot and be competitive locally. That only includes 1 major match fee and doesnt include travel and hotel. If you really want to be good at least double that. If you want a gun that runs reliably for multiple years and doesn’t cause you to lose matches when it breaks then $3,200 is nothing. If you just take it to the range a few times a year then yah, $3,200 is a lot, but then you aren’t the person this gun was built for

  • Ted August 8, 2022, 8:01 pm

    The rollers of the JP5 eliminate the need for a heavy bolt, buffer, buffer spring… but yet we will put the buffer tube on and the collapsible stock so it looks like every other gun which looks like an AR. It is a shame every gun made these days needs to have the same grip controls and stock as an AR.

  • August Bender August 8, 2022, 6:28 pm

    Nice gun, but not $3,200 worth of nice. If it was half the price and chambered in .45 Auto I’d be interested

  • Rocko Rizzo August 8, 2022, 2:16 pm

    Why would anyone want to spend $3200.00 on a Maybe $1000.00 gun?

    • David Boerboom August 12, 2022, 9:34 am

      Why would anybody buy a Mercedes, when they could have a Kia?

  • Frank August 8, 2022, 9:35 am

    Unless you’re an elitist, CMMG wins this battle hands down. If my Banshee 40 was any smoother, I couldn’t stand it!

    • Christopher August 12, 2022, 7:00 am

      When are Manufacturers going to start running .40 cal carbines

  • MeeesterPaul August 8, 2022, 9:23 am

    $3200 eh?
    CMMG radial delayed blowback at half the price comes to mind and begs some questions.
    Comparison test?

  • MeeesterPaul August 8, 2022, 9:16 am

    $3200 eh?
    CMMG radial delayed blowback at half the price comes to mind and bega some questions.
    Comparison test?

  • W August 8, 2022, 8:58 am

    Yeah, I’d definitely call that a high end price point. That’s a way out there price point.

  • Fal Phil August 8, 2022, 8:23 am

    Any chance JP Enterprises will come out with a 10mm version?

Send this to a friend