Description:
Brand New in the Box! Ready to Ship! Buy It Now!!
The DDM4v1, the original Daniel Defense Rifle, is built with a Cold Hammer Forged 16” M4 Profile barrel with a Carbine gas system. It comes installed with our proprietary front sight base which is precision CNC machined from a solid billet of 4140 steel. This FSB features a serrated curved design to minimize glare and is salt bath nitride treated minimizing corrosion and wear. The DDM4 Rail 12.0™ FSP allows the operator to mount a weapon light or aiming device forward of the front sight for optimal ergonomics and a clear line of sight. Quick disconnect attachment points are integrated to the front and back on both sides of the rail for fully ambidextrous sling attachment.
Lower Receiver:
Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined from 7075-T6 Aluminum, Type III Hard Coat Anodized
Upper Receiver:
Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
Barrel:
Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 16" M4 Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
Gas System:
Front Sight Base CNC machined from 4140 steel and Salt Bath Nitride Finished, Carbine Length, Direct Impingement
Muzzle Device:
Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
Bolt Carrier Group:
M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
Sights:
Daniel Defense A1.5 Fixed Rear Sight: CNC Machined from 6061-T6 aluminum, Type III Hard Coat Anodized; Daniel Defense FSP: CNC Machined from 4140 steel, Salt Bath Nitride Finished
Handguard:
Daniel Defense DDM4 Rail™ 12.0 FSP, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
Caliber: 5.56mm NATO
Capacity: (1) 30 Round PMAG
Buffer: H Buffer
Receiver Extension: 6 Position Mil-Spec 7075-T6 Aluminum
Buttstock: Magpul Fixed Buttstock
Pistol Grip: Daniel Defense Pistol Grip
Grip: Daniel Defense Vertical Grip
Rail Ladders: 3 low profile ladders made from Santoprene, heat resistant to 300° F.
Gas System: Carbine
Product Weight: 6.70 lbs
Length: 32 ¼” – 35 7/8”
Case: Daniel Defense Full-Latch Impact Plastic Case
Shipping to Lower 48 Only,
Shipping $30.00
KNOW YOUR LOCAL AND STATE LAWS!!
Condition:
New In Box
Brand:
Daniel Defense
Caliber:
.223 Remington (5.56 NATO)
Item #:
986311744
Stock No.:
DA-20000-SC
Location:
PA
Trades Accepted:
Shipping Notes: Shipping to lower 48 only,!
Please ask for Internet Sales when calling in.
All firearm sales are final. We do not accept returns for firearms whether they are new or used.
All firearms must be either shipped to a dealer in your state or picked up at our retail store in Saint Marys, PA. The buyer assumes the responsibility for transfer fees or background check fees that the receiving dealer will charge. It is also the buyer's responsibility to insure that the dealer will accept the firearm(s). We encourage that the buyer contact the dealer before we transfer the gun to them for pick-up to insure that there are no problems with your transfer. If the dealer refuses to accept delivery of your firearm, you will be responsible for shipping charges to recover the firearm and reship it to a dealer that is willing to receive it.
ORDERS WILL ONLY BE ACCEPTED FROM US RESIDENTS OF THE LOWER 48 STATES, ALASKA AND HAWAII. OUR FFL CLASS DOES NOT ALLOW FOR THE EXPORT OF FIREARMS, THEREFORE WE CANNOT SHIP OUT OF THE US.
**CALIFORNIA RESIDENTS: WARNING: SOME PRODUCTS MAY CONTAIN CHEMICALS THAT MAY EXPOSE YOU TO CHEMICALS WHICH ARE KNOWN IN THE STATE OF CALIFORNIA TO CAUSE CANCER AND REPRODUCTIVE HARM.
