Description:
Brand new in the box, buy it now! Ready to be shipped to your Class III Dealer!
This is a Class III Item and must be shipped to a Class III Dealer in your state. Please know all Federal, State & Local Laws regarding the purchasing and possession of these items.
The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel. The Flat Dark Earth MK18 rail system features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units). The 10.3” barrel is the same length in use for the MK18 upper most commonly used for CQB operations. The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
NFA DISCLAIMER
This firearm is a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.
MATERIALS & CONSTRUCTION
LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3? Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized (FDE or Black)
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
Made in the USA!
WARRANTY STATEMENT
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.
The above prices on this item reflect a 2.5% cash, money order, or certified check discount. This discount is not valid for credit card purchases. Add 2.5% to the total cost for credit card purchases.
Shipping to lower 48 only,
Shipping $30.00!
KNOW ALL LOCAL, STATE and FEDERAL LAWS!!
Condition:
New In Box
Brand:
DANIEL DEFENSE
Caliber:
.45 ACP
Item #:
969560745
Stock No.:
02-088-17024
Location:
PA
Trades Accepted:
Shipping Notes: Shipping to lower 48 only,
Please ask for Internet Sales when calling in.
All firearm sales are final. We do not accept returns for firearms whether they are new or used.
All firearms must be either shipped to a dealer in your state or picked up at our retail store in Saint Marys, PA. The buyer assumes the responsibility for transfer fees or background check fees that the receiving dealer will charge. It is also the buyer's responsibility to insure that the dealer will accept the firearm(s). We encourage that the buyer contact the dealer before we transfer the gun to them for pick-up to insure that there are no problems with your transfer. If the dealer refuses to accept delivery of your firearm, you will be responsible for shipping charges to recover the firearm and reship it to a dealer that is willing to receive it.
ORDERS WILL ONLY BE ACCEPTED FROM US RESIDENTS OF THE LOWER 48 STATES, ALASKA AND HAWAII. OUR FFL CLASS DOES NOT ALLOW FOR THE EXPORT OF FIREARMS, THEREFORE WE CANNOT SHIP OUT OF THE US.
**CALIFORNIA RESIDENTS: WARNING: SOME PRODUCTS MAY CONTAIN CHEMICALS THAT MAY EXPOSE YOU TO CHEMICALS WHICH ARE KNOWN IN THE STATE OF CALIFORNIA TO CAUSE CANCER AND REPRODUCTIVE HARM.
