A Sub-MOA Takedown .30-06 Lever Action? The Browning BLR – Full Review.

The Browning BLR Takedown will fit nicely in a backpack, for those remote, rugged hunts. Combine that with sub-MOA capability, and you have a real backcountry winner.

The lever-action rifle is so indelibly ingrained in American history that the mere sight of one brings the mind to the American West and the post-Civil War era. The lever action rifle mirrored the development of the metallic cartridge; the first Winchester ‘Yellow Boy” rifles were chambered for the .44 rimfire, a crude, copper-cased affair, but as the cartridges became stronger, so did the lever action rifles. Nearly up until the end of the 19th century, the level action rifle could handle the most powerful cartridges available at the time.

However, as the 20th century ushered its wonderful selection of cartridges – each a significant ballistic improvement over the previous offerings – the pressure levels exceeded that of the lever actions of the day. The lever gun then took on a different role, one that represented both firepower – most deer hunters relied upon the lever’s qualities as a repeating rifle up until the 1960s – and a good source of power for most hunting scenarios in North America. Certainly, the Winchester Model 1894 is still thriving – this rifle, chambered in .30/30 remains an American icon – but the first half of the 20th century saw the demise of the Model 1886, replaced (briefly) by the Model 71, that most stylish of lever guns, chambered for the .348 Winchester. Yet, the lever gun remained married to relatively low-pressure, rimmed rifle cartridges and, with the exception of the Winchester Model 88 and Savage Model 99, was pretty much destined to stay that way. Tubular magazines required flat or round nosed bullets to prevent magazine detonation, so the lever gun is essentially equated with a short- to medium-range cartridge.

The BLR combines modern ammunition performance with the classic charm of a lever action design in a modern and capable package. Image courtesy of the manufacturer.

The takedown BLR can be broken down for compact storage in moments and quickly reassembled.


  • Chambering: .30-’06 Springfield (tested)
  • Barrel: 22 inches
  • OA Length: 43.0 inches
  • Weight: 7 lbs, 4 oz.
  • Stock: Gray laminate wood, cut checkering, 18 LPI
  • Sights: Marbles/TruGlo red front sight, adjustable rear sight
  • Action: Lever action
  • Finish: Stainless steel
  • Capacity: 4
  • MSRP: $1,279.99

The Setup

The Browning firearms company, like its namesake, has always been forward thinking, and their lever action BLR is no exception. Released in the early 1960s, when the bolt-action rifle had firmly established its grip on the hunting world – even the staunchest deer hunting camps were seeing more bolts and fewer levers – the BLR represented a blend of desirable features that made, and still makes, perfect sense to the hunter. Firstly, the BLR uses a detachable box magazine, which most definitely allows the use of spitzer bullets, offering much flatter trajectories. Secondly, it uses a geared bolt and a lever that houses the trigger assembly, so there’s no risk of the all-too-familiar index finger pinch. With a receiver stout enough to handle even belted magnum cartridges, the Browning BLR brought the lever gun into the modern era, retaining enough of the classic lines to be visually appealing, but with improvements that changed the game.

The slab-sided design is still there, as is the exposed hammer, yet upon holding a BLR immediate differences from a traditional lever action are noted. The lever throw of a BLR is much shorter than that of a conventional lever gun, due to the rack and pinion bolt system. This design, with a rotating bolt head featuring a six-lug design and a plunger ejector, allows for the use of cartridges with a higher pressure than the conventional lever action designs. The receiver is fully closed, except the ejection port on the right side, allowing a scope to be mounted directly over the bore and as low as you’d like. The original BLRs were in a blued steel/walnut stock design, but things have changed over the years. The model I received for testing – the BLR Lightweight ’81 Stainless Takedown – was neither blued nor walnut; it featured a stainless steel barrel, aluminum alloy receiver, laminate wood stock combination, in a lightweight takedown configuration. This is one slick piece of design work! And to top it all off, it was chambered in the do-all .30-’06 Springfield.

The Browning BLR taken down. The six lug bolt and plunger ejector are clearly visible. Note the throw lever on the lower portion of the receiver for breaking down the rifle.

The BLR breaks down easily enough; a lever—located in a well on the underside of the forend, just ahead of the receiver—pulls down to allow the shooter to pull the barrel out of the receiver. For reassembly, simply insert the barrel into the receiver, making sure the lugs line up with the cut recesses in the barrel, close the lever and Voila!

I immediately thought of the mountain treks I take annually into the Catskill and Adirondack mountains, for both whitetails and black bear, and how this would make an excellent choice for both moose and elk hunts, where less weight can always be appreciated. A quick second shot is always desirable when hunting whitetails in the thick forests of the Northeast, and the BLR certainly delivers that. Being drilled and tapped for a scope – interestingly enough, this particular model was drilled and tapped on both receiver and barrel, for use with a conventional scope or a scout-style scope – the BLR will offer shots out to sane hunting distances. If you prefer the iron-sight setup common to so many lever guns, my Browning came equipped with a fully adjustable rear sight and a Marble’s/TRUGLO red fiber optic front sight, which aligned very naturally and offered high contrast, even on dark targets. The gray laminate stock came checkered on both the rear stock and forend, and is covered in a nice satin finish, to avoid any unnecessary glare. Metal work was dulled as well, so if you’re seen by your quarry, the rifle isn’t at fault. The exposed hammer has a nice, wide spur – perfect for cold hands or for use with gloves – and offers a fully-cocked position, as well as a half-cock. As an additional safety feature, the striking area of the hammer can be folded forward, under the firing pin, when in the half-cock position, to prevent any monkey business from going on.

The BLR hammer shown at half cock, with hammer folded under the firing pin.

For optics, I wanted something as rugged and durable as the rifle itself, yet lightweight enough to fit the lines of the rifle. I have come to rely on the Leupold 1.5-5x20mm scopes for many different jobs over the years, from woods rifles to dangerous game guns to rimfires, and I’ve never been disappointed. The new Leupold VX-3i is a wonderful riflescope, offering a crystal-clear image and reliable tracking, in addition to a slim profile that can be mounted close to the bore. At the lowest magnification, you can take animals nearly as well as with iron sights, yet the 5x top end allows a shooter to make accurate shots much farther than you’d expect in this era of high magnification. I thought that to best match the takedown capabilities of this gun – and I’m totally thinking backpack rifle – I wanted that Leupold set in a pair of detachable rings. It’s no secret that I’m a Talley fan; I’ve used their detachable rings on many of my rifles for years now, and they’ve never let me down. To keep with the stainless theme, I ordered a set of low, stainless Talley rings and appropriate bases, and easily mounted the Leupold scope. As is the case with Talley rings, it took very little correction with the boresighter to get things set up properly.

The gold trigger and classic buck logo mark this as a true Browning product. Image courtesy of the manufacturer.

At the Bench

I grabbed a selection of good hunting ammunition for the BLR, as I doubt any would disagree that this type of rifle is no benchrest affair; this rifle is destined for the field. Nosler’s Ballistic Tip ammunition, loaded with the 180-grain Ballistic Tip, would make a great choice for any thin-skinned game. The Federal Power-Shok cartridges, topped-off with the 150-grain copper hollowpoint bullet, will make a perfect choice for deer, antelope and similar sized game animals. Hornady’s Precision Hunter line is built around the fantastic ELD-X bullet; it’s perfect for shots both up-close and distant. At 178 grains, the .30-’06 load will handle windy conditions very well, especially for that cross-canyon elk, or a moose across a Canadian lake. Lastly, the Fusion 165-grain load offers a bonded core bullet, which will cleanly take bears over bait – usually a short shot with high impact velocities – or a whitetail across a hay lot. While there are so many different choices to fuel a .30-’06, I feel this quartet represents a good cross section of bullet designs.

It turns out that even though I’d mounted a relatively low-powered scope to the BLR, it shot very, very well. The Nosler Ballistic Tip – with a well-earned reputation for accuracy – printed ¾-inch groups at 100 yards. The Fusion ammo did almost as well, with groups sizes hanging right around an even inch. The Hornady Precision Hunter – much to my chagrin, as it did very in many other rifles I’ve tested – averaged a group size of 1 ¾ inches; certainly good enough for shots out to 300 yards, but certainly not representative of what this ammo has done in other guns. The Federal Power-Shok Copper printed wonderfully, averaging 5/8 to ¾ inch groups, with very uniform velocities. The overall velocity measurements were a bit lower than advertised, and I can attribute at least some of that to the shorter 22-inch barrel, but that’s a willing tradeoff when you realize this rifle can easily be broken down for transport in a backpack.

Rifle on the bench equipped with the Leupold scope and shown with Nosler’s 180-grain Ballistic Tip ammunition.

Now, please keep in mind that this is a lever action rifle – with the two-piece stock that is so often blamed for a lack of accuracy – and compound that with the fact that this is a takedown rifle, giving it another opportunity for an accuracy excuse. If all the Browning BLR takedown rifles are as accurate as my test gun, they’ve definitely got a winner. Also, I was curious about the repeatability of the accuracy when taking the down the rifle so I shot some groups before and after breaking it down. I experienced less than a one-inch shift in point of impact when the rifle was taken down and reassembled, which is perfectly fine with me.

I set up a 50-yard target, to get a feel for the capability of the rifle with iron sights, and was equally happy with the results. All ammunition provided kill shots, and I immediately thought of a situation where something tragic has happened to the riflescope, which could be quickly and easily removed to allow use of the iron sights. Does this make the rifle as capable as when it’s scoped? Certainly not, but an iron sighted rifle is most definitely better than no rifle at all.

Let me say again, the BLR has the advantage of the quick second shot that lever guns possess, with the additional benefit of using the spitzer bullet loads that generally provide the best accuracy and downrange characteristics. The detachable magazine – made of steel, which I greatly appreciate in this era of polymer hell – loaded easily and snapped into the rifle without issue, each and every time. Were this my rifle, I’d grab an extra magazine – I tend to lose things easily for some reason – to ward off any potential disaster on a remote hunt.

The closed receiver of the Browning BLR, made of an aluminum alloy for good strength and reduced weight.

Opinions, Observations and Other Thoughts

The Browning BLR – particularly in this configuration – is a functional rifle, in that the appointments of the gun are designed to deliver in the field, and not necessarily as eye candy. Yes, it’s an attractive design, but this dog was bred to hunt. If I had to pick some nits, I’d say there have been better wood-to-metal fits, and perhaps the forend – which is cut square to the bore – may not be the most fashionable design I’ve ever seen, but neither affects the performance of the rifle. The lever doesn’t appear to be parallel to the stock line, but that appears to be part of the design; perhaps my OCD kicked in on this aspect.

A fully adjustable rear iron sight allows for good accuracy potential.

The lever throw feels solid; the rack and pinion system is good and tight, with none of the wobble or chatter associated with some other lever action designs. The stock design and pliable recoil pad made shooting the BLR – even off the bench – a pleasure, and as it’s chambered .30-’06, it will do just about anything you’d ask of it. The takedown capability makes for a rifle destined for adventure; whether you choose to mount a scope at all – conventional or scout-style – the rifle breaks down enough for easy transport. With that lightweight Leupold VX-3i 1.5-5×20, the package has a nice balance to it, making for a quick-handling rifle that carries well in the hand and comes to the shoulder very nicely. I might have added a set of sling swivel studs, to make the longer treks a bit easier, but that’s just me.

If you’re after a rifle that pays homage to the American lever guns, yet takes full advantage of modern construction materials and methods, the BLR Lightweight ’81 Stainless Takedown makes all sorts of sense, from Alaska to Arizona.

To learn more, visit http://www.browning.com/products/firearms/rifles/blr/current-production/blr-lightweight-81-stainless-takedown.html.

To purchase a Browning BLR on GunsAmerica.com, click this link: https://www.gunsamerica.com/Search.aspx?Keyword=BLR.

{ 40 comments… add one }
  • Robert May 3, 2020, 11:58 am

    I have a BLR Lightweight ’81 Stainless Takedown in 30-06 as well. Have not been able to find the right reciever Mount scope ring bases for it. Talley has one (Just one) for BLR/BAR but I thought the profile was Different. I got the Warnes for BLR long action and it is not a good fit. Will be greatful for any pointers.

  • Max January 13, 2020, 11:49 am

    Is that back a browning buck 2500? If not- what model.

    Thank you.

  • Jack Kramer November 25, 2019, 4:29 pm

    Great rifle. Now if Browning would make it chambered in 375 Ruger or 9.3×62 would be great. Even better would be to have it in a two barrel set. I’d order one in a heartbeat.

  • Tony February 22, 2019, 8:01 am

    I have two takedowns and the standard model. Three BLR’s , .243, .270 wcf and a .450 Marlin. The .270 is my takedown sheep rifle. I am horseback all the time and use a split scabbard to carry it on a saddle horse, it is ideal. I have added Scout scopes to the takedowns also, and find it holds zero better and I can bore sight the barrel section.

  • bbbs53 December 25, 2017, 4:58 am

    I have a takedown Model 94 Winchester made in 1901, it is a fine shooter. I have a BLR in .308, also a fine shooter but not a takedown. This is a great looking hunting rifle and a takedown. Best of both worlds, I like it. The trigger pull isn’t hard to fix, IF you know what your doing. My shop does triggers daily. The rack gear action is nice as it can be, another winner for Browning.

    • Dan Fisher December 25, 2017, 1:37 pm

      Which gun shop / gunsmith do you use ? What weight trigger pull can they achieve?

    • oldnumber20 December 25, 2017, 1:55 pm

      Do you have contact info for the gunsmith that does these triggers? I had no luck finding a reputable shop that would work on a blr trigger 10 years ago. These guns have terrible trigger that many would like refined. I did mine myself (I’m not a smith) it turned out great. 50 years of doing my own work this blr trigger is the only thing I don’t care to repeat.

  • Mark.tercsak July 8, 2017, 10:44 am

    I have owned a couple of BLR’s one a steel receiver the current one aluminum aircraft grade receiver, I have found them to be accurate can hit a quarter at over a hundred yards. There are some issues, for me the butt stock seems a tad short, but I learned to compensate. The biggest issue for me is the expensive , but crappy made magazines, I have a spare on to , you put them in your pocket, walk into the field, go to pull the magazine out, and all the cartridges come popping out of the magazine, the only time you can count on the magazine, being reliable is when it’s in the rifle. Need to fix them Browning.
    Would like to see the BLR chambered in 358 hawk, 375 hawk and 411 hawk.

  • Norm Fishler June 13, 2017, 10:32 am

    I have had the BLR in both .308 & .358. Apart from the aforementioned wretched trigger pull I had no complaints. Both shot well, but the .358 was a hard kicker. Wish I still had that .358. The shorter actioned ones were nice looking rifles, but these later ones in .30/06 seem to me as being ungainly & the one I handled was (to me) awkward. Whatever the case, it’s gonna need a ‘Decelerator’ recoil pad or something similar. I just don’t take the pounding as gladly as I used to.

  • BEAR June 12, 2017, 10:08 pm

    Z Are you an employee of Browning?

    • Al June 13, 2017, 10:19 am

      Probably not, but his little jabs are often spot on.
      Example: money, or really, value. “no lever gun is worth $1300”
      A foolish statement, value is as individual as people.
      Would YOU give $1300 for one of Teddy’s Winchesters??? I sure as hell would!
      “Whatever happened to bluing and walnut stocks”?
      Nothing, those are still available on many guns.
      But if I were an Alaskan guide backpacking or flying into the remote areas of that wonderful State, the idea of SS and laminate has a very good business attraction. It’s a functional tool of the trade, and one that you may bet your life on, so it makes sense.
      “held four more rounds”.
      Some States restrict capacity of big game guns to 5 or 6 max, so what’s the marketing value of more???
      Sorry, but sometimes my fellow ‘gunnies’ say some things that I regard as silly. And in case you hadn’t noticed, we’re ALL experts!! 🙂
      But in their defense, tastes and desires are also as individual as value, so it all boils down to that individuality thing.
      How boring if all guns looked and were the same.

      • SCOT ST HILAIRE August 8, 2020, 5:04 am

        I love my blr. I had trigger job done on it and this rifle hits dead on. The trigger job wasnt dont right so the safety doesnt function properly now. However the rifle hits exactly where i want. Being a stand hunter it is fine with no safety i suppose. I dropped it off yesterday to have the safety worked on. Hopefully its going to be ok

    • Z June 13, 2017, 11:16 am

      I own a pile of rifles, shotguns and handguns. I have three Browning rifles, two of them are BLR’s and one of those happens to be a .30-06. I had the stock cut and a pacmyer decelerator put on it and I had the trigger worked on by a gunsmith. The triggers definitely aren’t match grade from the factory but they serve their purpose. In the aforementioned pile of rifles you would find AR’s, AK’s, a Garand, and three Ruger Mini’s in the various available calibers and stocks. The point is, when I want a semi automatic rifle with more than four rounds I buy a semi automatic rifle with more than four rounds. If I want a rifle with blued steel and a walnut stock, I buy a blued steel walnut stocked rifle. What I don’t do is, I don’t go into the comments section of a very well written article and complain about how the lever action hunting rifle isn’t an AR.
      You also won’t find me at a strip club watching other guys get lap dances, complaining about the girls they choose while I stand in the shadows playing pocket pool wearing a name tag that reads, “Bear”.

  • Mark M. June 12, 2017, 12:24 pm

    There’s nothing wrong with polymers.

  • Cyrus June 12, 2017, 11:53 am

    . . . . If only it held more than 4 rounds.

    • Z June 12, 2017, 6:47 pm

      The model reviewed is in 30-06 and the rifle is intended for hunting. It has a detachable magazine. It literally separates in half and still maintains sub MOA accuracy at 100 yards. How many rounds does a Lever Action hunting rifle need?
      If only a 1/2 ton truck could tow a house up a mountain and go from 0-60 faster than a Corvette while delivering 40 retired gamblers to a casino.

      • David December 26, 2017, 12:29 pm

        You forgot “and get 180 mpg!”

  • tyler kent June 12, 2017, 10:51 am

    That is one damn ugly rifle. Whatever happened to bluing and walnut stocks???

    • Z June 12, 2017, 11:52 am

      Did you take the time to read the article before offering your opinion? The rifle is available in blue and walnut. You could have visited Browning’s website and verified it. Lazy troll.

  • JARED SHAFFER June 12, 2017, 10:45 am

    I have one of these in 308 and browning should be ashamed to put out a rifle with such a horrible trigger. It’s mushy, gritty, and about 9lbs. I think it’s a terrific design just held back by the trigger.

    • Zupglick March 18, 2019, 11:20 am

      Try cleaning and lubing it.

  • Doug June 12, 2017, 10:40 am

    A beautiful rifle! Now if only it was available in .357/.38

    • Forrest Adcock June 13, 2017, 4:35 am

      Even better, they offer it in .358!

      Ever wonder what shooting a deer with a freight train looks like? Kicks like a mule, but deer don’t run, they just fall over.

  • SW June 12, 2017, 10:22 am

    I have the BLR takedown in the .325WSM and couldn’t ask for a better all around gun.From Whitetails to Grizz it will do it all, and right now in their tracks. Trigger pull is fine for a hunting rifle and can’t see where all the whining about it is?? This new rifle should be a winner in the great 30.06 chamber without the little extra recoil of my .325 and will get the job done for most hunters. The only thing I don’t agree with is the choice of scopes,I have the Leopold 2-7 and wouldn’t go with any less than this for range and brightness.And price of rifle can always be less with a little shopping around. At my age, the takedown is easy to carry and very accurate. Love the Browning !!

  • Joe Randazzo June 12, 2017, 10:20 am

    Excellent review. I wish all handgun and rifle reviews were so thorough. Only thing missing for me is the country of manufacture. Please don’t tell me China. I would also like to see a lower price. Perhaps discounted it will be slightly less.

    • JLA June 13, 2017, 3:36 am

      It’s made by Miroku in Japan. They make a lot of guns for a lot of companies, and they’re all excellent quality.

  • Jim June 12, 2017, 9:29 am

    Yep, trigger pull is a real issue for me with my 7-08 BLR, heavy and creeps!

  • Dan June 12, 2017, 6:57 am

    Nope! Leave it alone! Maybe have great gunsmith lighten trigger ! Great article! I’m sure that both my grandsons we’ll have one in their collection soon that I can play with!

  • Altoids June 12, 2017, 6:46 am

    Stopped reading at the MSRP. No lever gun is worth $1300

    • SW June 12, 2017, 10:24 am

      Shop around ,you can always find a deal less than the MSRP. You get what you pay for with this nice rifle.

    • Z June 12, 2017, 12:06 pm

      People said the same thing about luxury cars and yet they’re still being sold. Well, not to you, but certainly to people with the income and desire to own them. Good thing firearm manufacturers don’t follow the path of lowest price product any more than auto manufacturers. I’m sure the model T was a nice car and all, how’s the suspension on yours holding up?

    • GaryO June 15, 2017, 11:55 am

      You sound like one of these people that wants a caddy for the price of a vw. I have several lever guns that cost more than 1300 dollars if you don’t want to pay the money for quality buy the cheaper guns. But remember you get what you pay for.

    • Ron December 25, 2017, 12:55 pm

      Then you probably shouldn’t look at any Big Horn Armory lever actions, they cost almost twice as much..yet still manage to sell a bunch of them…go figure! I guess some of us like quality:)

  • shrugger June 12, 2017, 6:19 am

    Well now, that is interesting. Have they lightened the heavy as hell trigger at all?

  • Charlie J Boudreaux June 12, 2017, 5:49 am

    “The lever throw of a BLR is much shorter than that of a conventional lever gun, due to the rack and pinion bolt system. ”
    With all due respect as I look at the seventh photo that lever throw does not look short to me. It looks to be no shorter than any of my lever guns and maybe longer than some. My issue with the BLR has always been the trigger as the design has the trigger connected to the lever and that is problematic in function and repeatability. Henry has fixed this issue with their Long Range lever gun which resembles the BLR with some changes in the trigger(resides in the receiver) and the way the for forearm attaches.

  • Joe June 12, 2017, 5:45 am

    Well engineered is my thinking. The first rifle I ever bought back in the early seventies was a Winchester model 94 , and if it was in 30- 06 instead of 30 -30 I might still have it now. Being a take down rifle is a plus as well. I love my Browning auto five and I bet this will be another out of the park rifle.

  • Dan Fisher June 9, 2017, 9:21 pm

    You didn’t mention how many pounds it took for the trigger to break. They are known for heavy triggers – – up to 7 lbs.

    I had a BLR in 308 Win. It shot great on the bench in a controlled set-up, but the heavy trigger pull was a real hindrance in the field and contributed to some misses on game. I sold it because of this and the high gloss finish. I wanted a hunting rifle……..mine had a lot of glare in the sunlight. My hunting buddies told me about it.

  • George June 9, 2017, 3:22 pm

    This was a well written article which is a rarity on the Guns America site. Answered every question I had about this rifle and I’ve lusted after a BLR for most of my life but just couldn’t justify buying one. I might now but even if I don’t, I was informed and entertained by the writer which as I mentioned, is a unusual occurrence on this site… 🙂 Damn fine job by the author.

    • Brad December 25, 2017, 9:51 pm

      What could possibly be more useful than some negative, positive reinforcement?

      Why would anyone continue to read GunsAmerica if they find it so poorly written/below them?

      You can easily find some other website to complain about/on.

  • JASON MARSHALL June 9, 2017, 8:59 am

    I was thinking of getting the same gun. The only change would be a forward mounted long eye relief scope 3-6X

Leave a Comment

Send this to a friend